MPI Blower Lid Installed

BeelowSS · 10-31-2021, 02:18 PM

Buddy of mine just installed one of these LT4 blower lids from MPI (Mechanical Power) out of Chicagoland. This thing looks and sounds sick! Super easy install. Utilizes stock gaskets/bolts. No tuning required. Just more air flow, more whine and power. They dyno'd the lid on a Vette and it increases horse +11rwhp and +14rwtq. Have to imagine with a few bolt ons and a tune this thing really sings.

Check it out!

BeelowSS · 11-24-2021, 08:24 AM

BeelowSS · 11-24-2021, 08:25 AM

Just incase anyone is interested I saw that MPI is having a Black Friday sale for their lids and they have a pretty sweet video showcasing the Z06.

laynlo15 · 11-24-2021, 10:55 AM

Good looking for sure. Pretty expensive but looks cool under the hood.

Domo14SS · 11-26-2021, 08:03 PM

Outta Chicago, eh? I'm out South so I'll absolutely have to check this place out!

BeelowSS · 12-28-2021, 12:48 PM

Please check us out. This is a really tasteful and value add mod to a $80K vehicle for relatively low cost. Power, actual blower whine and a unique look under the hood.

whiteZLE · 01-08-2022, 10:35 PM

what is the size of this lid compared to the stock lid ? Does it stick up higher than the stock one ?

Trochoidal · 01-09-2022, 12:45 PM

Quote:

Originally Posted by BeelowSS

Buddy of mine just installed one of these LT4 blower lids from MPI (Mechanical Power) out of Chicagoland. This thing looks and sounds sick! Super easy install. Utilizes stock gaskets/bolts. No tuning required. Just more air flow, more whine and power. They dyno'd the lid on a Vette and it increases horse +11rwhp and +14rwtq. Have to imagine with a few bolt ons and a tune this thing really sings.

Check it out!

Looks nice. Is this made from 6061 or 7075? Is the underside anodized too?

10-31-2021, 02:18 PM	#1
BeelowSS Drives: 2012 SIM ZL1 Join Date: Dec 2010 Location: Roselle, IL Posts: 147	MPI Blower Lid Installed Buddy of mine just installed one of these LT4 blower lids from MPI (Mechanical Power) out of Chicagoland. This thing looks and sounds sick! Super easy install. Utilizes stock gaskets/bolts. No tuning required. Just more air flow, more whine and power. They dyno'd the lid on a Vette and it increases horse +11rwhp and +14rwtq. Have to imagine with a few bolt ons and a tune this thing really sings. Check it out! Attached Images __________________ 2012 Chevrolet Camaro ZL1 691/649 DC Porting S/C Port NW 103mm, ported snout MPI LSA Lid w/ reinforced brick DSX Flex Fuel conversion FIC 1200's LSA 2.5” upper METCO LSA pulley kit Comp camshaft: (236/242 .602/.610 113+3) HD supercharger belt DC Conservative Tune DSS Carbon Fiber Driveshaft BMR everything McLoed HD Clutch Roto-Fab CAI MGW Shifter Kooks 1 7/8” LT's Corsa Sport AFCO HX 315/30/20 R888R 285/35/20 R888R XPEL Ultimate PPF 35% Llumar tint Oracle LED sidelights ZL1 AddOns Wicker Bill

11-24-2021, 08:25 AM	#3
BeelowSS Drives: 2012 SIM ZL1 Join Date: Dec 2010 Location: Roselle, IL Posts: 147	Just incase anyone is interested I saw that MPI is having a Black Friday sale for their lids and they have a pretty sweet video showcasing the Z06. __________________ 2012 Chevrolet Camaro ZL1 691/649 DC Porting S/C Port NW 103mm, ported snout MPI LSA Lid w/ reinforced brick DSX Flex Fuel conversion FIC 1200's LSA 2.5” upper METCO LSA pulley kit Comp camshaft: (236/242 .602/.610 113+3) HD supercharger belt DC Conservative Tune DSS Carbon Fiber Driveshaft BMR everything McLoed HD Clutch Roto-Fab CAI MGW Shifter Kooks 1 7/8” LT's Corsa Sport AFCO HX 315/30/20 R888R 285/35/20 R888R XPEL Ultimate PPF 35% Llumar tint Oracle LED sidelights ZL1 AddOns Wicker Bill

11-24-2021, 10:55 AM	#4
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Good looking for sure. Pretty expensive but looks cool under the hood. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

12-28-2021, 12:48 PM	#6
BeelowSS Drives: 2012 SIM ZL1 Join Date: Dec 2010 Location: Roselle, IL Posts: 147	Please check us out. This is a really tasteful and value add mod to a $80K vehicle for relatively low cost. Power, actual blower whine and a unique look under the hood. __________________ 2012 Chevrolet Camaro ZL1 691/649 DC Porting S/C Port NW 103mm, ported snout MPI LSA Lid w/ reinforced brick DSX Flex Fuel conversion FIC 1200's LSA 2.5” upper METCO LSA pulley kit Comp camshaft: (236/242 .602/.610 113+3) HD supercharger belt DC Conservative Tune DSS Carbon Fiber Driveshaft BMR everything McLoed HD Clutch Roto-Fab CAI MGW Shifter Kooks 1 7/8” LT's Corsa Sport AFCO HX 315/30/20 R888R 285/35/20 R888R XPEL Ultimate PPF 35% Llumar tint Oracle LED sidelights ZL1 AddOns Wicker Bill

11-26-2021, 08:03 PM	#5
Domo14SS Drives: 2019 Camaro ZL1 1LE Join Date: Apr 2018 Location: South Chicago Suburbs Posts: 291	Outta Chicago, eh? I'm out South so I'll absolutely have to check this place out!

01-08-2022, 10:35 PM	#7
whiteZLE Drives: 2022 Zl1 1LE Join Date: Nov 2021 Location: missouri Posts: 8	what is the size of this lid compared to the stock lid ? Does it stick up higher than the stock one ?

User Name		Remember Me?
Password