07-09-2021, 06:34 PM | #1 |
Drives: 2017 2SS F1FTY Join Date: Feb 2020
Location: Fort Wayne, IN
Posts: 347
|
BTR Stage 2 Cam installed and dyno #s
VIDEO https://fb.watch/6Fraft4zXX/
BTR Stage 2 Cam, double valve springs and titanium retainers, hardened pushrods and valve stem seals DOD delete kit including GM head gaskets, GM head bolts, LS7 lifters, GM lifter trays, GM header gaskets and DOD valley oil plugs Cam install kit including water pump gaskets, cam bolt, cam phaser lockout, GM crank bolt and GM fuel lash cap, GM sealant The cam is easy enough to daily drive on the street if you wanted to. Definitely has a nice lope to it. Combined with the headers and exhaust it sounds incredible. RotoFab Dry CAI Kooks 1 7/8" catted headers, ceramic coated Borla cat back exhaust, S type NPP 93 octane dyno tuned to 510.4 rwhp @ 6275 rpm, 463 lb-ft @ 4925 RPM Redlines @ 6800 RPM Last edited by Aaron07; 07-11-2021 at 05:38 AM. Reason: Add video link |
07-09-2021, 06:43 PM | #2 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,395
|
any pre camshaft numbers? track or dyno? who tuned it?
__________________
2016+ camaro: everyone’s first car
|
07-09-2021, 07:01 PM | #3 |
Drives: 2017 2SS F1FTY Join Date: Feb 2020
Location: Fort Wayne, IN
Posts: 347
|
Pre cammed I was headers, exhaust, CAI, tuned to 447 rwhp. Bumper Wilsons Tuning in Ft Wayne is who I use
__________________
2017 2SS F1FTY/HUD/Mag Ride/NPP/Nav/M6/Mishimoto catch can/BTR stage 2 Cam kit/GPI ported LT2 IM and 95mm TB/Roto Fab CAI/Kooks Long Tubes ceramic coated/Borla S Type NPP catback/AFE lowering springs/1LE wheels/OEM smoked tail lights/Diode Dynamics side markers/Uniden R7/3D Maxpider floor mats/Adams graphene ceramic coat
|
07-09-2021, 07:17 PM | #4 |
Drives: 2002 z28, 2018 2ss 1LE Join Date: Sep 2012
Location: Parrish, Florida
Posts: 835
|
Must sound awesome , got any videos ?
|
07-09-2021, 08:02 PM | #5 |
Drives: 2017 2SS F1FTY Join Date: Feb 2020
Location: Fort Wayne, IN
Posts: 347
|
I do on my phone, but I am not sure how to upload them. I can do pics, but not sure on videos. Tutorial?
__________________
2017 2SS F1FTY/HUD/Mag Ride/NPP/Nav/M6/Mishimoto catch can/BTR stage 2 Cam kit/GPI ported LT2 IM and 95mm TB/Roto Fab CAI/Kooks Long Tubes ceramic coated/Borla S Type NPP catback/AFE lowering springs/1LE wheels/OEM smoked tail lights/Diode Dynamics side markers/Uniden R7/3D Maxpider floor mats/Adams graphene ceramic coat
|
07-10-2021, 09:47 AM | #6 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,796
|
Sounds good...Bumper Wilson seems to do good work! I seen the vid on his Facebook page.
https://fb.watch/6Fraft4zXX/
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
07-10-2021, 02:03 PM | #7 |
Drives: 2020 Camaro 1SS/2014 Challenger RT Join Date: May 2020
Location: STL
Posts: 16
|
Ported heads?
|
07-10-2021, 11:30 PM | #8 | |
Drives: 2017 2SS F1FTY Join Date: Feb 2020
Location: Fort Wayne, IN
Posts: 347
|
Quote:
__________________
2017 2SS F1FTY/HUD/Mag Ride/NPP/Nav/M6/Mishimoto catch can/BTR stage 2 Cam kit/GPI ported LT2 IM and 95mm TB/Roto Fab CAI/Kooks Long Tubes ceramic coated/Borla S Type NPP catback/AFE lowering springs/1LE wheels/OEM smoked tail lights/Diode Dynamics side markers/Uniden R7/3D Maxpider floor mats/Adams graphene ceramic coat
|
|
07-10-2021, 11:32 PM | #9 |
Drives: 2017 2SS F1FTY Join Date: Feb 2020
Location: Fort Wayne, IN
Posts: 347
|
__________________
2017 2SS F1FTY/HUD/Mag Ride/NPP/Nav/M6/Mishimoto catch can/BTR stage 2 Cam kit/GPI ported LT2 IM and 95mm TB/Roto Fab CAI/Kooks Long Tubes ceramic coated/Borla S Type NPP catback/AFE lowering springs/1LE wheels/OEM smoked tail lights/Diode Dynamics side markers/Uniden R7/3D Maxpider floor mats/Adams graphene ceramic coat
|
07-11-2021, 05:38 AM | #10 |
Drives: 2017 2SS F1FTY Join Date: Feb 2020
Location: Fort Wayne, IN
Posts: 347
|
__________________
2017 2SS F1FTY/HUD/Mag Ride/NPP/Nav/M6/Mishimoto catch can/BTR stage 2 Cam kit/GPI ported LT2 IM and 95mm TB/Roto Fab CAI/Kooks Long Tubes ceramic coated/Borla S Type NPP catback/AFE lowering springs/1LE wheels/OEM smoked tail lights/Diode Dynamics side markers/Uniden R7/3D Maxpider floor mats/Adams graphene ceramic coat
|
07-11-2021, 06:31 AM | #11 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,395
|
do you have a pic of the dynograph? m6 i think it looks like.
you gonna be down in indy for sct?
__________________
2016+ camaro: everyone’s first car
|
07-11-2021, 08:25 AM | #12 |
Drives: 2017 2SS F1FTY Join Date: Feb 2020
Location: Fort Wayne, IN
Posts: 347
|
M6 yes. Cam card and dyno graph. I do think I’ll be Indy for one or two of those days!
__________________
2017 2SS F1FTY/HUD/Mag Ride/NPP/Nav/M6/Mishimoto catch can/BTR stage 2 Cam kit/GPI ported LT2 IM and 95mm TB/Roto Fab CAI/Kooks Long Tubes ceramic coated/Borla S Type NPP catback/AFE lowering springs/1LE wheels/OEM smoked tail lights/Diode Dynamics side markers/Uniden R7/3D Maxpider floor mats/Adams graphene ceramic coat
|
07-13-2021, 12:43 AM | #13 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,395
|
right on. great info. we'll have to make some pulls when you're down.
__________________
2016+ camaro: everyone’s first car
|
07-13-2021, 12:59 AM | #14 |
Drives: 2017 2SS F1FTY Join Date: Feb 2020
Location: Fort Wayne, IN
Posts: 347
|
Sounds good! I'll PM you when I arrive.
__________________
2017 2SS F1FTY/HUD/Mag Ride/NPP/Nav/M6/Mishimoto catch can/BTR stage 2 Cam kit/GPI ported LT2 IM and 95mm TB/Roto Fab CAI/Kooks Long Tubes ceramic coated/Borla S Type NPP catback/AFE lowering springs/1LE wheels/OEM smoked tail lights/Diode Dynamics side markers/Uniden R7/3D Maxpider floor mats/Adams graphene ceramic coat
|
|
|
Post Reply
|
|
|