[Ricco]

Originally Posted by drfeelgood

Ricco, great numbers! I am sticking with roto fab + ported TB + Kooks headers with green cats + borla cat back + 2.3" griptech upper. If I get 100+ whp I'll be happy. I' was told by multiple shops, given our shitty 91 octane, I need to consider meth or flex fuel if I want to do more, and I really just want to fill up and go. But great job! Again, its not the final numbers, its the trap time and butt dyno that matters.

Good deal, I would expect you will see similar numbers, maybe just a hair less due to the cats and I'm not sure where that pulley will put you in terms of boost.

My plan was to do cam next but it looks like it will be the Whipple going on next, possibly with Meth and do cam later.

My car will likely never see any kind of track, if anything I might go to a drag strip just to try it out as I have never driven one before.. I have other choices I would prefer to take to a road course vs my $90k Camaro

[psalmon123]

Originally Posted by Ricco

My performance mods are

Kooks 1 & 7/8ths Headers
Kooks 3" midpipe into stock NPP
Elite Carbon Intake
TM TB
9.17" Lower pulley
#SorianTuned

THX!

[Ricco]

Installed the dark GM tail lights and in the middle of doing the 3rd brake light - Had to stop and get some goof off tomorrow before I can fit the new one on.

Also did the Ryker mod, although on the first few tries, it seems you will likely still need to touch the body to close it but I havent finished up yet, so we will see. Had to use a longer bolt as the first one wasn't long enough to get the threads started through these washers on the strap.




Cordes header tank came in too. Starting gathering parts for round two!

[kttxz06]

Originally Posted by Ricco

Installed the dark GM tail lights and in the middle of doing the 3rd brake light - Had to stop and get some goof off tomorrow before I can fit the new one on.

Also did the Ryker mod, although on the first few tries, it seems you will likely still need to touch the body to close it but I havent finished up yet, so we will see. Had to use a longer bolt as the first one wasn't long enough to get the threads started through these washers on the strap.




Cordes header tank came in too. Starting gathering parts for round two!

U need my wheels!!!! I'll hook you up. I'm looking at getting a set of Welds.

[Ricco]

Originally Posted by kttxz06

U need my wheels!!!! I'll hook you up. I'm looking at getting a set of Welds.

I’m so cheap, you’d have to basically give me them for free..LOL

Not that I don’t like them but this is the first car that I’m putting most of the mod money into the motor.

I’d also be willing to put them on my car and advertise them for you once you get Welds! Hahaha


Sent from my iPhone using Tapatalk

[kttxz06]

Originally Posted by Ricco

I’m so cheap, you’d have to basically give me them for free..LOL

Not that I don’t like them but this is the first car that I’m putting most of the mod money into the motor.

I’d also be willing to put them on my car and advertise them for you once you get Welds! Hahaha


Sent from my iPhone using Tapatalk

I'm trying to price a set of Welds so. I might as well do a whole front and rear set up and sell my wheels I have on there now. We'll see how these hold power. If they hold, I'll just keep them.

[Ricco]

Finally got around to putting on the Dark Tail Lamps.

[Ricco]

Unfortunately, date night turned into extended date night due to getting a flat on the way home.



I think I broke some of the belts and ruptered the sidewall of the tire. You can see the split in the rubber, just ahead of the rim protector.



It loaded onto the tow truck without scraping which was good.



Unfortunately the guy wasn't the most diligent with the tie down straps and this was the resulting damage. I have a claim in with OnStar, so we will see how that goes. I'm going to try and see if I can convert this to a carbon diffuser if only Anderson Composites will make one for the ZL1.


Still gave her a bath this morning, just going to have to order those Toyo's a little ahead of the planned schedule.

[Mcmillion]

Sorry for the damage. You will love the Toyos I just got some for the rears and I am really happy with them.

[psalmon123]

Originally Posted by Ricco

Unfortunately, date night turned into extended date night due to getting a flat on the way home.



I think I broke some of the belts and ruptered the sidewall of the tire. You can see the split in the rubber, just ahead of the rim protector.



It loaded onto the tow truck without scraping which was good.



Unfortunately the guy wasn't the most diligent with the tie down straps and this was the resulting damage. I have a claim in with OnStar, so we will see how that goes. I'm going to try and see if I can convert this to a carbon diffuser if only Anderson Composites will make one for the ZL1.


Still gave her a bath this morning, just going to have to order those Toyo's a little ahead of the planned schedule.

Anderson Composites will have the CF diffusers available in August. They are priced at $995.00. You have to call and put your name in.

[drfeelgood]

One of the guys in westcoastmaros has a carbon fiber front splitter. Also carbon fiber front grill and canards for his ZL1-1Le. Maybe they used his car as a prototype

[Ricco]

Originally Posted by drfeelgood

One of the guys in westcoastmaros has a carbon fiber front splitter. Also carbon fiber front grill and canards for his ZL1-1Le. Maybe they used his car as a prototype

Yeah, they have them hanging on the wall in Phastek - They just havent made the ZL1 diffuser yet, just an SS version which is different to the ZL1 in the exact spot that the tow truck damaged mine.

[kttxz06]

Originally Posted by drfeelgood

One of the guys in westcoastmaros has a carbon fiber front splitter. Also carbon fiber front grill and canards for his ZL1-1Le. Maybe they used his car as a prototype

Where did that CF hood come from?

[Ricco]

Originally Posted by kttxz06

Where did that CF hood come from?

I assume it is Anderson Composites.

https://andersoncomposites.com/colle...bon-fiber-hood