[MR-02]

Hi, about a year ago I installed a flowmaster cat back exhaust. Now has an exhaust leak stain at the connection -see photo-
1. Will this eventually corrode into a hole on the GM cat side pipes?
2. Can I assume they are stainless?
3. In the photo, the left side is the engine side, the right side is the flowmaster exhaust side. Does Anyone know why all the staining is so prominent only on the left side of the connection clamp?

[VinnAY]

Im unconcerned by it but I would get under there and see if you can get another turn on those nuts.

[MR-02]

Originally Posted by VinnAY

Im unconcerned by it but I would get under there and see if you can get another turn on those nuts.

Hi and Thanks,
...but is the GM pipe stainless? Will it rust out if it gets worse?

[Gunkk]

1. no
2. yes
3. don’t know. maybe gravity. The black wet soot often drips out of the stock suitcase’s weep holes. It’s just soot.

[MR-02]

Originally Posted by Gunkk

1. no
2. yes
3. don’t know. maybe gravity. The black wet soot often drips out of the stock suitcase’s weep holes. It’s just soot.

Ok Thanks!