Nightfall Grey Camaro wants Side Rockers

GAHDOOSH · 10-22-2016, 10:41 AM

Can't find a set of rockers I really like.
I'm 100% sure that I want to paint them carbon flash black to match the NPP lower diffuser, but I'm not crazy about the bulky appearance of the ACS set and I'm not thrilled about the wing at the back of the Street Scene. Certainly after two years we have more than two options?!?

Looking for something thin looking like the carbon ones you could get on the Z06 corvette 2015-2017.

Suggestions?

Also, if anyone has a good photo of Street Scene rockers on the Nightfall grey, I'm leaning towards that set.

Spedee · 10-22-2016, 11:24 AM

I don't think ACS are too bulky.
I purchased the primed set. Had the front section wrapped in gloss black.
The rear part is carbon fiber wrap

thebatmobile · 10-22-2016, 12:14 PM

Quote:

Originally Posted by Spedee

I don't think ACS are too bulky.
I purchased the primed set. Had the front section wrapped in gloss black.
The rear part is carbon fiber wrap

How's the black holding up against dust and dirt? Also did you wrap your splitter as well? How's it holding up against chips from rocks?

Spedee · 10-22-2016, 01:41 PM

Splitter is wrapped in clear Suntek paint protection. Similar to 3M.
Suntek Paint Protection on the complete front of the car including around the front window, mirrors and headlights. Not one stone chip. The front splitter has carbon fiber wrap on the ends tying in with my rockers. Everything is holding tight and standing up very well. Another benefit to the ACS rockers is, it keeps stones off of the bodywork just ahead of the rear tires. My 2013 Gen5 had sand blasting there. Not this car.

Here's the front splitter end:

mikem2104 · 10-22-2016, 02:53 PM

oh perfect! you have acs rockers and the gm splash guards!
how was the install, did it line up correctly?? i considering the same thing

Spedee · 10-22-2016, 03:15 PM

I notched the bottom corner of the splash guards to make the ACS rockers fit.
Rockers to me were more effective at keeping the stones off the body work.

mikem2104 · 10-22-2016, 04:40 PM

how much did you have to notch out? mind posting a picture?

Spedee · 10-22-2016, 05:45 PM

1.25" x 3/4"

Hyper16 · 10-22-2016, 06:35 PM

Quote:

Originally Posted by Spedee

I don't think ACS are too bulky.
I purchased the primed set. Had the front section wrapped in gloss black.
The rear part is carbon fiber wrap

I really like what you did there. Adding the SS emblem was ingenious. Really sets it apart.

Night Vision Universe · 02-06-2017, 07:14 PM

Quote:

Originally Posted by Spedee

1.25" x 3/4"

What did you us to notch them out ?

jcastag · 11-10-2018, 07:43 AM

Interested in this as well... Do you have a photo

kropscamaro16 · 11-12-2018, 11:13 AM

i added the oem front 1le splitter cause nothing was really out and also wanted some sides but im in the same boat and same color lol i like the acs stuff but so much $$$$

Drsagacity · 11-12-2018, 11:11 PM

Quote:

Originally Posted by GAHDOOSH

Can't find a set of rockers I really like.
I'm 100% sure that I want to paint them carbon flash black to match the NPP lower diffuser, but I'm not crazy about the bulky appearance of the ACS set and I'm not thrilled about the wing at the back of the Street Scene. Certainly after two years we have more than two options?!?

Looking for something thin looking like the carbon ones you could get on the Z06 corvette 2015-2017.

Suggestions?

Also, if anyone has a good photo of Street Scene rockers on the Nightfall grey, I'm leaning towards that set.

I got mine from C7 Carbon.

Name: 6278D1E4-1D6C-418F-A7F1-25FB10309B7A.jpg
Views: 384
Size: 147.2 KB

Name: A8FFEE8C-79E1-4DF4-9077-4830CF0E2D16.jpg
Views: 436
Size: 143.9 KB

jcastag · 11-19-2018, 05:52 PM

Nobody has a close up pic of notched out oem splash guards

10-22-2016, 10:41 AM	#1
GAHDOOSH GAHDOOSH Drives: 2016 Camaro 1SS Join Date: Apr 2013 Location: Greenville, South Carolina Posts: 502 View My Garage	Nightfall Grey Camaro wants Side Rockers Can't find a set of rockers I really like. I'm 100% sure that I want to paint them carbon flash black to match the NPP lower diffuser, but I'm not crazy about the bulky appearance of the ACS set and I'm not thrilled about the wing at the back of the Street Scene. Certainly after two years we have more than two options?!? Looking for something thin looking like the carbon ones you could get on the Z06 corvette 2015-2017. Suggestions? Also, if anyone has a good photo of Street Scene rockers on the Nightfall grey, I'm leaning towards that set. __________________ GAHDOOSH 2016 1SS 6.2L LT1 Manual 6-Speed, Front Emblem Blackout, Rear Bowtie Delete, Side emblem delete, Phastek Side Marker Tint, GM Black Taillights, $23.57 of Premium Gas this morning

10-22-2016, 11:24 AM	#2
Spedee Drives: SS Join Date: Dec 2015 Location: Canada Posts: 159	I don't think ACS are too bulky. I purchased the primed set. Had the front section wrapped in gloss black. The rear part is carbon fiber wrap Last edited by Spedee; 09-20-2017 at 05:12 PM.

10-22-2016, 01:41 PM	#4
Spedee Drives: SS Join Date: Dec 2015 Location: Canada Posts: 159	Splitter is wrapped in clear Suntek paint protection. Similar to 3M. Suntek Paint Protection on the complete front of the car including around the front window, mirrors and headlights. Not one stone chip. The front splitter has carbon fiber wrap on the ends tying in with my rockers. Everything is holding tight and standing up very well. Another benefit to the ACS rockers is, it keeps stones off of the bodywork just ahead of the rear tires. My 2013 Gen5 had sand blasting there. Not this car. Here's the front splitter end: Last edited by Spedee; 09-20-2017 at 05:12 PM.

10-22-2016, 02:53 PM	#5
mikem2104 Drives: 18 2SS 1LE, 20 Canyon Denali Join Date: Feb 2016 Location: Windsor, ON Posts: 488	oh perfect! you have acs rockers and the gm splash guards! how was the install, did it line up correctly?? i considering the same thing __________________ Mike Current Garage: 18' 2SS 1LE, Hyper Blue 23' GMC Canyon Denali Previously: 20' GMC Canyon Denali 16' 2SS 6MT, Hyper Blue, Kalahari, 20" PVW Chrome Split wheels, NPP, MRC (Total Loss) 14' Ford Edge Sport 06' Saab 9-7x,13' Nissan 370z Sport, 12' VW Jetta GLI, 02' Olds Bravada

10-22-2016, 04:40 PM	#7
mikem2104 Drives: 18 2SS 1LE, 20 Canyon Denali Join Date: Feb 2016 Location: Windsor, ON Posts: 488	how much did you have to notch out? mind posting a picture? __________________ Mike Current Garage: 18' 2SS 1LE, Hyper Blue 23' GMC Canyon Denali Previously: 20' GMC Canyon Denali 16' 2SS 6MT, Hyper Blue, Kalahari, 20" PVW Chrome Split wheels, NPP, MRC (Total Loss) 14' Ford Edge Sport 06' Saab 9-7x,13' Nissan 370z Sport, 12' VW Jetta GLI, 02' Olds Bravada

10-22-2016, 03:15 PM	#6
Spedee Drives: SS Join Date: Dec 2015 Location: Canada Posts: 159	I notched the bottom corner of the splash guards to make the ACS rockers fit. Rockers to me were more effective at keeping the stones off the body work.

10-22-2016, 05:45 PM	#8
Spedee Drives: SS Join Date: Dec 2015 Location: Canada Posts: 159	1.25" x 3/4" Last edited by Spedee; 09-20-2017 at 05:12 PM.

11-10-2018, 07:43 AM	#11
jcastag Drives: 2017 Camaro FIFTY 2SS Join Date: Jan 2017 Location: Bluffton, SC Posts: 303	Interested in this as well... Do you have a photo

11-12-2018, 11:13 AM	#12
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,812	i added the oem front 1le splitter cause nothing was really out and also wanted some sides but im in the same boat and same color lol i like the acs stuff but so much $$$$ __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

11-19-2018, 05:52 PM	#14
jcastag Drives: 2017 Camaro FIFTY 2SS Join Date: Jan 2017 Location: Bluffton, SC Posts: 303	Nobody has a close up pic of notched out oem splash guards

User Name		Remember Me?
Password