ARP Long Studs out of stock - alternative recommendations?

Jimbeau11 · 06-28-2019, 12:31 PM

So my new Apex wheels have been sitting for weeks waiting for the ARP studs to come in before shipping out. Corey from Apex spoke to ARP and apparently late July is the soonest they'll have them back in stock. Checked Summit and JEGs, both look to ship directly from the manufacturer. Checked with a local shop and they have the smaller diameter for the Corvette but not the ones for our cars.

I have a 3-day event in July and was really hoping to run the new wheels with GY 3Rs but need the longer studs to accommodate the spacer.

Anyone have alternative recommendations, part# & supplier?

Thanks,
Jim

Bluebarchetta · 06-28-2019, 04:27 PM

Supplier: MSI, in North Carolina. It’s all we use on our race cars. Further they supply a lot of NASCAR so I’d think they would have the right size. We’ve always been able to get a fast response with a call to them

Harpinc · 06-28-2019, 04:46 PM

Quote:

Originally Posted by Bluebarchetta

Supplier: MSI, in North Carolina. It’s all we use on our race cars. Further they supply a lot of NASCAR so I’d think they would have the right size. We’ve always been able to get a fast response with a call to them

I would only use MSI on my car..

Tay · 06-29-2019, 07:13 PM

Quote:

Originally Posted by Bluebarchetta

Supplier: MSI, in North Carolina. It’s all we use on our race cars. Further they supply a lot of NASCAR so I’d think they would have the right size. We’ve always been able to get a fast response with a call to them

Do you have the part number for the MSI studs for a gen 6 Camaro?

Stephen12ZL1 · 06-29-2019, 10:06 PM

amazon claims to have 9 sets in stock of ARP 100-7736

Bluebarchetta · 06-30-2019, 02:35 PM

Quote:

Originally Posted by Tay

Do you have the part number for the MSI studs for a gen 6 Camaro?

Sorry no. Don’t have them on my 1LE, just on my race cars. However, they have always been helpful and responsive with a phone call direct to them

Tay · 06-30-2019, 06:36 PM

Quote:

Originally Posted by Bluebarchetta

Sorry no. Don’t have them on my 1LE, just on my race cars. However, they have always been helpful and responsive with a phone call direct to them

Thanks Bluebarchetta!

Jimbeau11 · 07-01-2019, 09:04 AM

Quote:

Originally Posted by Bluebarchetta

Supplier: MSI, in North Carolina. It’s all we use on our race cars. Further they supply a lot of NASCAR so I’d think they would have the right size. We’ve always been able to get a fast response with a call to them

Thanks!

Jimbeau11 · 07-01-2019, 09:05 AM

Quote:

Originally Posted by Stephen12ZL1

amazon claims to have 9 sets in stock of ARP 100-7736

I'm not sure those are long enough? 100-7737 is what Apex recommends one inch over stock length.

06-28-2019, 12:31 PM	#1
Jimbeau11 Drives: '18 Black SS 1LE; '01 Corvette Z06 Join Date: Nov 2018 Location: Lehigh Valley, PA Posts: 119	ARP Long Studs out of stock - alternative recommendations? So my new Apex wheels have been sitting for weeks waiting for the ARP studs to come in before shipping out. Corey from Apex spoke to ARP and apparently late July is the soonest they'll have them back in stock. Checked Summit and JEGs, both look to ship directly from the manufacturer. Checked with a local shop and they have the smaller diameter for the Corvette but not the ones for our cars. I have a 3-day event in July and was really hoping to run the new wheels with GY 3Rs but need the longer studs to accommodate the spacer. Anyone have alternative recommendations, part# & supplier? Thanks, Jim

06-29-2019, 10:06 PM	#5
Stephen12ZL1 Drives: '21 ZLE A10 Join Date: May 2012 Location: Mechanicsville, VA Posts: 6,809	amazon claims to have 9 sets in stock of ARP 100-7736 __________________ '21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60' '17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold)

06-28-2019, 04:27 PM	#2
Bluebarchetta Drives: 2017 SS 1LE Join Date: Jun 2018 Location: NE Ohio Posts: 39	Supplier: MSI, in North Carolina. It’s all we use on our race cars. Further they supply a lot of NASCAR so I’d think they would have the right size. We’ve always been able to get a fast response with a call to them

User Name		Remember Me?
Password