09-13-2020, 12:42 PM | #1 |
Drives: Fast Join Date: Jun 2013
Location: My Garage
Posts: 76
|
How to Remove the Soft Limiter
What are the options, if any, to remove the soft limiter on an automatic 10spd ZL1?
Is there an OBD tune that will remove the soft limiter? |
09-13-2020, 02:11 PM | #2 |
Drives: 2016 2SS Convertible Join Date: May 2012
Location: St. Louis, MO
Posts: 1,710
|
The engine rev limiter and speed limiter are both programmed in the computers. I’m not aware of any OBD device that can override either one of them.
|
12-22-2020, 06:45 PM | #3 |
The Mechanic
Drives: 1SS M Join Date: Dec 2017
Location: NJ
Posts: 291
|
I did it for my m6 with hptuners. Took a few months to figure it out. Im not sure if it would work for autos
__________________
BTR 225 w/CNC Heads|JLT intake|Speed Engineering 1"7/8 long tube and mid pipe|LT2 manifold w/95mmTb|Self tuned w/HPtuners|Silvers 2Way coilovers|Hotchkis front sway|Advan AD08R|BMR solid cradle bushings|Recaro SR7| Work ZR10 19"
|
12-24-2020, 05:11 AM | #4 |
Makis
Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019
Location: London - UK
Posts: 806
|
Can you post how you did it with HP Tuners?
|
12-25-2020, 07:38 AM | #5 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
12-31-2020, 10:54 AM | #6 |
The Mechanic
Drives: 1SS M Join Date: Dec 2017
Location: NJ
Posts: 291
|
Ya I believe it was in adjusting the hysteresis to around 50 or 80rpm and the key was increasing the torque command in the cut off so that it doesn't pull power at the limiter. Took a while for me to figure that out last year sometime.
__________________
BTR 225 w/CNC Heads|JLT intake|Speed Engineering 1"7/8 long tube and mid pipe|LT2 manifold w/95mmTb|Self tuned w/HPtuners|Silvers 2Way coilovers|Hotchkis front sway|Advan AD08R|BMR solid cradle bushings|Recaro SR7| Work ZR10 19"
|
|
|
Post Reply
|
|
|