03-26-2013, 04:29 PM | #15 |
You serious Clark?
Drives: 2012 Summit White 2LS Join Date: Jul 2012
Location: Auburn, AL
Posts: 323
|
So more wiring?�� I spent forever wiring my relay for my eagle eyes and now this :( why can't anything be easy? Basically I'm just needing to make my own connection for from the prongs to the projector input on the harness? Using a female connector from autozone?
After reading it once more I've got it.. Ill stop by autozone and get it over with!
__________________
Last edited by Hayden; 03-26-2013 at 04:41 PM. |
03-26-2013, 07:41 PM | #16 |
You serious Clark?
Drives: 2012 Summit White 2LS Join Date: Jul 2012
Location: Auburn, AL
Posts: 323
|
Wait its my passenger side high beam I'm having a hard time getting to work.. which is confusing the hell out of me now because my passenger side directly connects the relay.. I'm literally having the hardest time explaining this. lol I'm normally good with these things.. but for some reason i'm just dead.
__________________
|
03-26-2013, 08:10 PM | #17 |
You serious Clark?
Drives: 2012 Summit White 2LS Join Date: Jul 2012
Location: Auburn, AL
Posts: 323
|
More pictures explaining it would mean so much. I have the Female H13 harness from auto zone.. But I'm frozen from there.
__________________
|
03-27-2013, 12:22 AM | #18 | |
Drives: Yellow 2SS camaro Join Date: Mar 2013
Location: GA
Posts: 75
|
Quote:
Ok now you got a female from autozone you can see that you have 3 wires from that female connector right ? 1 .Just plug that female in to the male which comes from the relay harness ,now you will have 3 bare wires for your relay in stead of a male connector (that's the purpose of buying/connecting the female H13). 2.On the driver side usually people will tell you to unplug the factory GREEn H13 harness BUT in this case you DO NOT do that ,just leave it like that .Now you need to splice those bare wires (from your autozone H13 female connector)into the eagle wires .The connection point could be any where after your GREEN FACTORY harness (I highly recommend to splice them in right after your H13 green,and the eagle eye connectors), that will give you a Y connections from the factory h13 harness to control both the high beam and to signal your relay .You need to CAREFULLY look to see which wire should connect to which because the H13 and the Eagle eye wires are different colors .(I don't know if yours are the same as mine ,you can see the pict that I posted above of the color wire connection ,it should be the same since you and I got them from the same seller). 3.Now just unplug your eagle eye bulb out (trash it if hou want)and tape the bulb connector up well ,leave it in the housing ,plug HID bulb in and reseal the flex housing cap back .(repeat this #3 step for the passenger side ).i forgot on the HID bulbs you will see an extra red and black wires ,one side has 2 spades and the other side is a orange cnnector you don't use this anymore just pull them out from both HID bulbs to save some space . From there just crack a beer,sit back and enjoy your new HID Last edited by Belam; 03-27-2013 at 09:08 AM. |
|
03-27-2013, 10:28 AM | #19 | |
You serious Clark?
Drives: 2012 Summit White 2LS Join Date: Jul 2012
Location: Auburn, AL
Posts: 323
|
Quote:
__________________
Last edited by Hayden; 03-27-2013 at 10:51 AM. |
|
03-27-2013, 01:39 PM | #20 |
Drives: Yellow 2SS camaro Join Date: Mar 2013
Location: GA
Posts: 75
|
I didn't cut anything from the relay (that's why I got H13 female connector ) .I think that you may got a different relay harness that's why you missed seeing the point of the H13 female .can you take a clear pict of the driver side of the relay harness for me ? (No need on the passenger )
I will give you some Picts so you can tell when I get home tonight |
03-27-2013, 02:08 PM | #21 | |
You serious Clark?
Drives: 2012 Summit White 2LS Join Date: Jul 2012
Location: Auburn, AL
Posts: 323
|
Quote:
http://www.theretrofitsource.com/pro...ducts_id=14029 My exact harness. So thats on the passenger side. Again I'm confused on how to get the high beam to work on the passenger side.
__________________
Last edited by Hayden; 03-27-2013 at 02:21 PM. |
|
03-27-2013, 02:22 PM | #22 | |
Drives: Yellow 2SS camaro Join Date: Mar 2013
Location: GA
Posts: 75
|
Quote:
|
|
03-27-2013, 03:10 PM | #23 |
You serious Clark?
Drives: 2012 Summit White 2LS Join Date: Jul 2012
Location: Auburn, AL
Posts: 323
|
Thank you I know its so simple.. but for some reason its just not all clicking
__________________
|
03-27-2013, 03:37 PM | #24 |
You serious Clark?
Drives: 2012 Summit White 2LS Join Date: Jul 2012
Location: Auburn, AL
Posts: 323
|
Here are some pictures of the driver side.. They should explain themselves on how Ive got things hooked up tell me what I've done wrong.
Driver Side: This is where I connected the new harness? http://imageshack.us/photo/my-images/145/ds****01g.jpg/ Not sure where I'm tapping into yet! http://imageshack.us/photo/my-images/43/ds****02xg.jpg/ Relay http://imageshack.us/photo/my-images...s****03by.jpg/ Passanger Side for Shits and Gigs: http://imageshack.us/photo/my-images...s****04xp.jpg/ http://imageshack.us/photo/my-images/94/ds****05jk.jpg/ I don't know why the hell my pictures are doing this.. will fix when i get off work.
__________________
|
03-27-2013, 03:41 PM | #25 |
Drives: Yellow 2SS camaro Join Date: Mar 2013
Location: GA
Posts: 75
|
I was about to tell you that .just use a tool press it real hard in til you feel a Solid Click sound . I did the same thing .
|
03-27-2013, 07:48 PM | #26 |
Drives: Yellow 2SS camaro Join Date: Mar 2013
Location: GA
Posts: 75
|
Ok the first pict that shows the relay harness male plugged into female (from autozone) .
|
03-27-2013, 07:55 PM | #27 |
Drives: Yellow 2SS camaro Join Date: Mar 2013
Location: GA
Posts: 75
|
This 2nd pict show that you need to connect the female wires right into the eagle eye wire (connection point will be right exact where my thumb is ) I used 3 quick splices to do that really simple (brown to white ,green to black ,black to blue) .
Last edited by Belam; 03-27-2013 at 09:45 PM. |
03-28-2013, 11:33 AM | #28 |
You serious Clark?
Drives: 2012 Summit White 2LS Join Date: Jul 2012
Location: Auburn, AL
Posts: 323
|
I was blind but now I see Thanks for the pictures. Im a visual type of guy.
Thanks!
__________________
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Eagle Eye Headlights with HIDs | erk5000 | Cosmetics and Lighting Modification Discussions | 234 | 03-03-2013 11:29 PM |
Xenith Xenons now offers GEN HID Conversion Kits with prices starting at $59.95! | Xenith Xenons | Exterior Parts & Accessories | 21 | 04-05-2011 01:38 AM |
Camaro HID Conversion Kit (non-RS) Special till 12/20/09 $195 | Mecha | Exterior Parts & Accessories | 11 | 05-05-2010 04:48 PM |
5202 (H16 ; 9009) Slim HID Kits !!! 09-Up Camaro Fog Light HID kits !!! | HID_Guy | Exterior Parts & Accessories | 19 | 09-08-2009 01:07 AM |
2010 Camaro Fog/DRL Light 5202 HID kits .... | HID_Guy | Exterior Parts & Accessories | 1 | 09-07-2009 12:19 PM |