03-18-2020, 09:59 PM | #1 |
|
Swapped Out My Interior Today!
Before and After!
Just upgraded my Camaro interior to factory Adrenaline Red Leather Seats. For years I've been considering upgrading to a custom interior. My weird problem with that is that the black leather (for the back of the seat) that aftermarket leather providers use is actually black. GM uses a special black that isn't actually BLACK. So when you look at a custom interior there is a difference in the tone of the aftermarket leather color and the tone of the carpet/trim color. I know how crazy this sounds..... But that's why I never did it. Instead I hand dyed each individual stitch on my old seats to red to match the car. The 5th generation of Camaro lasted from 2010-2015. In these years they only offered black, orange, tan, and gray interior color options. Until 2015 when they made the last 5th gen Camaro special edition. They were called the Commemorative Edition. These cars featured a special Adrenaline Red leather interior. I have always wanted this interior. I LOVE red interior. I priced this setup out once through GM and it was insane. I was able to get this interior from a wrecked Commemorative edition and I couldn't pass it up! It is soooooo BEAUTIFUL! |
03-18-2020, 10:00 PM | #2 |
Drives: 2SS/RS LS3 NPP Join Date: Feb 2018
Location: Sacramento
Posts: 227
|
Looks great!!
__________________
Taylor 409's, BF Comp 2's, Z26 pads, Hurst billet shifter
|
03-18-2020, 10:08 PM | #3 |
Instagram: Mr2Hard2See
Drives: 2011 2SS/ RS Join Date: Apr 2018
Location: SF Bay Area
Posts: 691
|
that’s cool look just like my iom interior
__________________
YOUTUBE CHANNEL: Mr2Hard2See
LSA blower BTR stg 2 cam 227/242 BTR dual springs pushrods lifters retainers etc Che bronze trunnion Ls3 timing/valley cover Dod/vvt delete Dsx e85 Dsx aux fuel pump Id1050x injectors ZL1 fuel pump, Griptech 2.55 pulley, Solo performance Mach ll 2.5 catback exhaust 1 7/8th Lt headers |
03-18-2020, 10:12 PM | #4 |
|
Nice!!!
__________________
|
03-18-2020, 10:28 PM | #5 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,575
|
Dayum! Seriously, that looks awesome.
What are you doing with the old seats? I like those too. Did you color that thread yourself on the originals?
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
03-18-2020, 11:12 PM | #6 |
Drives: Camaro Convertible 2014 1LT Join Date: May 2019
Location: New Jersey
Posts: 1,013
|
F%^ck*&g AWESOME!
|
03-18-2020, 11:26 PM | #7 |
|
Yeah I dyed each individual stitch by hand to match the car. It fades out quick and I had to do it a few times to touch it up. But the new seats have factory red stitching so I am pumped to have them!
|
03-19-2020, 12:42 AM | #8 |
Drives: 2014 Red Hot LS3 Join Date: Oct 2014
Location: SF Bay Area, CA
Posts: 4,266
|
Awesome look!
|
03-19-2020, 05:53 AM | #9 |
Valkyrie14
Drives: Chevrolet Camaro SS Join Date: Mar 2020
Location: Eau Claire, Wisconsin
Posts: 962
|
Awesome, and BTW your garage is the Sh*t!
__________________
2014 SS LS3/LSA Supercharger, 10% Super Damper, 2.55 upper, AGP Dual Pump, ID 1050 injectors, Pegasus solid rear cradle bushings, LT Headers, Roto-Fab CAI, Elite E2 catch can, E85 corn fed, 160 Thermostat, Monster Twin Disk, MGW Short Throw shifter, Tick Clutch Master Cylinder, HP Tuners, JL Audio system.
|
03-19-2020, 05:53 AM | #10 |
Drives: 2011 RS Join Date: Jun 2018
Location: Coldwater Mi
Posts: 175
|
OK....for those that like red......me....not so much.
I think MY garage is "Dah Shit!!"....Including my 22' x 3.5' x 6' dp. PIT!!
__________________
Proud Owner Of '11 Camaro
|
03-19-2020, 06:57 AM | #11 |
Drives: 2010 Camaro 2SS/RS Black & Silver Join Date: Aug 2010
Location: Richmond, VA
Posts: 8,228
|
Looks great!
__________________
STAINLESS WORKS HEADERS-TUNED BY JANNETTY RACING-C.A.I. INTAKE-TAYLOR 409 WIRES-SOLO AXLE BACK EXHAUST-ELITE CATCH CAN |
03-19-2020, 07:06 AM | #12 |
Drives: 2012 Camaro SS Join Date: Jun 2019
Location: Toronto
Posts: 159
|
I've been casually looking around for something similar, because that looks absolutely amazing. Great job!
__________________
2012 Camaro SS LS3, JRE Scoop, CAI intake, Whipple Supercharger, Fast 85lb injectors, ZL1 pump, McLeod RXT clutch, MGW shifter, Stainless Power 1 7/8 headers w/HFC, Ridetech coilovers, BMR sway bars, trailing arms, toe rods, cradle bushing inserts, 2020 Speed Tuned.
|
03-19-2020, 07:36 AM | #13 |
Drives: 2012 Camaro SS Join Date: Dec 2019
Location: New York
Posts: 1,434
|
That is so nice. Looking to do that one day but try and get a company to match my imperial blue metallic paint
__________________
2012 Camaro 2SS/RS - CSP Custom Cam 232/240 .615/.615 113 +3, Texas speed CNC heads, FTI billet triple disc converter, K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, tru cool 40k trans cooler, apex scoop, Pedders extreme coil overs and much more!!
|
03-19-2020, 08:52 AM | #14 |
Drives: 2013 SS 1LE Join Date: Nov 2011
Location: Cincinnati / N KY area
Posts: 559
|
Good job on the seats !!!
|
|
|
|
|