You are browsing camaro6 
10-24-2019, 05:33 PM
|
#1 |
|
8.60 @ 157 @ 4200lbs
|
Paint
Freind Pulled engine on his ls7 vette to rebuild and orange paint on main caps and rods any idea. Origanal owner.
__________________
2010 camaro twin turbo 8.60 @ 157 full weight 4200
|
|
|
|
10-24-2019, 08:35 PM
|
#2 |
 
Drives: '16 Z06 7 Spd, 2024 High Country HD Join Date: May 2015
Location: Kansas City area
Posts: 442
|
Pretty sure all LS7 engines were hand built at Wixom Performance Center. I found some videos of the build process - link below. Starting close to the 1 minute mark, they are installing crank & bearing caps. You can see the red/orange markings.
https://www.bing.com/videos/search?q...A9&FORM=VDMCNR Last edited by h422694; 10-24-2019 at 08:54 PM. |
|
|
|
|
10-25-2019, 05:53 AM
|
#3 |
|
corner barstool sitter
Drives: 08 Mustang GT, 19 WRX Join Date: Jul 2012
Location: Eastern Time Zone
Posts: 6,990
|
Paint does not create stress risers like stamped location and orientation marks does. Hand built - I'm guessing that file-fit rings were used.
Norm
__________________
'08 GT coupe 5M (the occasional track toy)
'19 WRX 6M (the family sedan . . . seriously)  |
|
|
|
|
10-25-2019, 06:04 AM
|
#4 |
|
8.60 @ 157 @ 4200lbs
|
Paint
I knew all hand built but first I seen paint. Thanks for input and video
__________________
2010 camaro twin turbo 8.60 @ 157 full weight 4200
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
