10-22-2018, 07:40 PM | #1 |
Drives: 2016 Camaro 2SS Join Date: Apr 2017
Location: Stansbury Park, Utah
Posts: 1,087
|
Help: HP Tuners MPVI2 with which gauge(s)?
I've been searching and can't really find an answer. My question:
I'm buying HP Tuners MPVI2 (and an AEM-X series AFR w/pass thru OBD2 cable) for datalogging. I understand how this works using the AEM pass thru cable and plugging the MPVI2 in that. But... my question... how can I datalog at the track and also see IATs on another gauge at the same time? Can VCM scanner be setup to show some gauges or display IATs (while data logging) ? Thanks,
__________________
2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000
New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth. Last edited by grampa_ss; 10-23-2018 at 03:17 PM. Reason: some questions answered |
11-01-2018, 03:00 PM | #2 |
Drives: 2018 Summit white 2SS 1LE Join Date: Nov 2016
Location: Michigan
Posts: 56
|
Yes you can set it up to display whatever you want while logging. If you have an OBD2 gauge that reads IAT im sure you could just buy another pass thru OBD cable and plug all of them in at the same time.
|
11-06-2018, 09:34 AM | #3 |
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
Yes, the scanner can show all sorts of data while logging. I have a section that shows what the sensor is seeing, a gauge section that shows the highest recorded amount and then the line graph and a spreadsheet all at the same time.
__________________
2019 Corvette Z06 2LZ A8 - Halltech CAI, AWE non-catted X-pipe, Mamo V2 ported TB 592rwhp, bone stock 566rwhp
2017 Camaro SS 1LE - Procharger D1SC w/ Tial 2" BOV & Race intercooler / ARH full length catless headers / Alky meth injection system - 650rwhp on conservative tune SOLD |
11-17-2018, 01:28 PM | #4 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
my question is there any wideband that puts lambda values into the ODBII bus so I can data log, I run 93 and e85 so a/f is useless to me.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
11-17-2018, 01:30 PM | #5 | |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
Quote:
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
|
11-17-2018, 09:00 PM | #6 |
Drives: Camaro Join Date: Mar 2016
Location: Michigan
Posts: 107
|
Welcome to hptuners, promise features for years, then end up never releasing. Been doing this since the original ls1 days
|
01-21-2019, 06:00 PM | #7 |
Drives: 2016 2ss Camaro Join Date: Oct 2013
Location: Alabama
Posts: 119
|
Open VCM Scanner. In the left column you should see your wb eq Raitio. Right click on it go over to units and select lambda.
__________________
HBM 2016 2SS A8 NPP
427 Pray Head/Cam/Converter, Pray Ported Highram, 103mm TB, Pray Tuned, 3030 Drag Pack, Roark OTR CAI, TSP Headers, E85, UDP Best times 1/4 n/a 9.23@146.96, 1/8 5.91@118 |
01-22-2019, 01:19 PM | #8 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,218
|
Quote:
https://www.hptuners.com/mpvi2/
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
01-31-2019, 07:37 AM | #9 |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
FYI - I have a vent mounted dual gauge pod with a AEM X-Series OBD2 data stream that can be setup to monitor any PID on the CAN bus, and have a AEM X-Series OBD2 Wideband that is integrated into Hp tuners to datalog the wideband without the Pro option
The standard MPIV2 can Datalog all PIDs on the car as standard, the Pro option allows Datalog without the computer being linked.
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
01-31-2019, 08:22 AM | #10 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,218
|
Quote:
Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
01-31-2019, 09:19 AM | #11 |
Drives: 2016 Camaro 2SS Join Date: Apr 2017
Location: Stansbury Park, Utah
Posts: 1,087
|
This is what I see, so i'm still a little confused.
1. connect the aem wideband w/passthru obd2 to cars obd2 port 2. connect the aem data stream gauge to the aem passthru obd2 connection. that's where obd2 is terminated. question is how do I connect my MPVI2 obd2 in order to datalog? there's no open obd2 ports anymore. Do I need to disconnect the aem data stream gauge which would make the obd2 port available?
__________________
2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000
New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth. |
01-31-2019, 09:21 AM | #12 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,218
|
Quote:
Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
01-31-2019, 09:30 AM | #13 |
Drives: 2016 Camaro 2SS Join Date: Apr 2017
Location: Stansbury Park, Utah
Posts: 1,087
|
Thank you for the quick response.
__________________
2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000
New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth. |
|
|
Post Reply
|
Thread Tools | |
|
|