[Kaizer_911]

Originally Posted by BeckyD@JamesMartinChevy

Attachment 976134





You should be added here:...

Wikipedia



......

I made a Milestone Too....



- Thank You! -



........

I Club F1FTY



..........

-Becky aka 50th Godmother

Thanks Becky!!!

Congrats again on your milestone as well!

Club F1FTY is a great place.

- Adam aka 50th Godfather


Sent from my iPhone using Tapatalk

[Kaizer_911]

Originally Posted by Soleil

Wow, herzlichen Glückwunsch zu 6000 post. well done

Thanks Soleil! Just a few posts here and there. Lol.


Sent from my iPhone using Tapatalk

[KyBoy]

Originally Posted by Kaizer_911

Thanks for the heads up on this. Maybe those of us who keep stock tires/wheels won’t run into this? Even so, let us know how hard it is to relocate the harness.


Sent from my iPhone using Tapatalk

I wouldn't think stock tires would have an issue. I'll keep you all updated.

Heath

[RicSimonis]

Originally Posted by KyBoy

I wouldn't think stock tires would have an issue. I'll keep you all updated.

Heath

I'm sure Wildhammer will be tapping you for a review as well. Looking forward to further details.

$%@#, you're making this hard Heath. I'm really liking the "close-enough" orange accents it gives. I'd have to confirm that there's no restrictions for a Vert vs the coupe. Haven't seen any in the descriptions, yet.

[Soleil]

Originally Posted by KyBoy

I found a slight issue with the car yesterday, my F1FTY brethren. I want to report it here so everyone is aware, before following my setup.

I'm not sure if this was pre or post lowering springs. Although, I feel like it's post springs. I see slight rubbing on my rear driver side fender well. The infamous wiring harness bulge.

It hasn't wore through, but I am going to relocate the harness today to be on the safe side.

Just for reference.
Rear wheels are 20x11 MRR M017.
Tires are 305/30x20 Michelin PS4S.
Heath

That is because of the new offset. The OEM got 20x9.5 et39 the MRR got 20x11et43 that makes around 1” further in to the strut. Now you lower the car by ~1” that makes the difference. As long as you have OEM wheels everything is ok. Mine is lower by 1” as well and nothing. To avoid rubbing I am using 15mm spacer instead of wider wheels.

[Soleil]

Originally Posted by Kaizer_911

Thanks Soleil! Just a few posts here and there. Lol.
Sent from my iPhone using Tapatalk

Yeah just a few posts. I remember my first post on page 292 and now we are at 11300+
Adam for creating the 50th corner.

[Kaizer_911]

Originally Posted by Soleil

Yeah just a few posts. I remember my first post on page 292 and now we are at 11300+

Adam for creating the 50th corner.

Yeah this thread has done better than I ever imagined. But it helps that it’s frequented by so many awesome people.

Most welcome for creating our “little” corner.


Sent from my iPhone using Tapatalk

[JoeP@TeamBeckyD]

Originally Posted by Kaizer_911

Yeah this thread has done better than I ever imagined. But it helps that it’s frequented by so many awesome people.

Most welcome for creating our “little” corner.


Sent from my iPhone using Tapatalk

.....

I Look - Everyday!

.......
I Love this Thread...



-Becky aka 50th Godmother

[KyBoy]

Hey Becky! Hope your having a great day!

Well friends, I relocated the wiring. Was pretty simple.



Heath

[Soleil]

Did you use a heat gun to re-shape the wheel well? Or just push it back?

[KyBoy]

Originally Posted by Soleil

Did you use a heat gun to re-shape the wheel well? Or just push it back?

I just held it back and tightened the screw. There is play in the hole for adjustment.

Heath

[AKI.SILES]

Originally Posted by Kaizer_911

I wish had something profound for my 6,000th post. But I don’t.

Is it Fest time yet? Is the rain ending soon?


Sent from my iPhone using Tapatalk

Congrats man, for your 6k👍

[Kaizer_911]

Originally Posted by AKI.SILES

Congrats man, for your 6k

Thanks. Just a “few” posts here and there.


Sent from my iPhone using Tapatalk

[Homer2]

Originally Posted by KyBoy

Here you go my friend.

https://wildhammermotorsports.com/ca...kit-afe-power/

Heath

Thank you kind sir.. It's on sale even ! ! ! Damn tempting. Add 35% to the price and that's my cost, plus taxes and duties at the border ( prolly another 15%).

But that colorrrrrrrrrrrr