12-27-2017, 08:16 AM | #1 |
Drives: 2020 2SS Join Date: Oct 2016
Location: Greenville, SC
Posts: 36
|
SS splitter on a LT
Can somebody tell me is it possible to onstall and SS Splitter I’m an LT. I not only like the look of the SS splitter, but they are also cheaper than the ones for the LTs.
|
12-27-2017, 10:33 AM | #2 |
Yes, but up close there are little gaps from not perfectly matching up. But you have to get close, from a distance looks good, i have one on mine. They are same price from what i see.
Only thing i would say is, don't use the sticky tape, along the outer 1/3rd ends of each side of the front and the corners(center 1/3 makes full contact). Since the tape does not come contact with the Nose, it will hold dust and junk that could build up and rub the nose paint. Here is corner, the white is the tape making contact. The curve to the outside moves away little from bumper. The the part pointing back the tape makes contact. Here is the outer 1/3 from the left side, there is a little gap so the tape is not in contact with the nose. Last edited by HyperBlue16; 12-27-2017 at 10:44 AM. |
|
12-27-2017, 05:01 PM | #3 |
Drives: 2020 2SS Join Date: Oct 2016
Location: Greenville, SC
Posts: 36
|
What splitter is that?
|
12-27-2017, 06:12 PM | #4 |
|
|
Post Reply
|
Tags |
exterior, splitter, turbo |
Thread Tools | |
|
|