03-22-2020, 08:38 AM | #1 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
Manley Forged Lt1 Rods/Piston, Lt1 Crank/Block
Fresh Lt1 Crank-Standard on the mains and 0.010 on the rods. $400 plus shipping- This crank is used but has been freshly machined and ready to go. A new crank is about 1000.00.
Livernois DOD/VVT delete cam-.641-641 lift, 228-241Duration on 116 lsa Livernois Ls7/Lt1/Lt4 springs and lifters with trays. $410 plus shipping-Used. Fresh Manley forged rods, these were rebuilt by Manley, I spent 250 plus shipping to have them rebuilt. They will take the standard Lt1 bearings. $450 plus shipping (sold) Manley Forged Pistons with rings but they are used with 50 runs $400.00 Plus shipping. Lt1 block that will need to be lined bored as it has one spun bearing. It will be 400 to 600 for machine shop services, $400 plus shipping. With ARP main studs 600.00 A new Lt1 block is 1800.00 to 2000.00 plus shipping. This would have be shipped on pallet/freight. I'll post pictures today sometim
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
Last edited by laynlo15; 05-28-2020 at 09:47 PM. |
03-28-2020, 07:26 AM | #2 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
Make some offers. Would really like to move these parts. thx
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
03-28-2020, 02:16 PM | #3 |
Drives: 2017 50th Camaro SS Join Date: Jul 2016
Location: Maryland
Posts: 525
|
If you get a chance could you post some pics of the rods and pistons and also the Manley parts #'s?
Thanks
__________________
50th Anniversary Edition |Borla Atak and 60606 mid pipes| Kooks 1 7/8" | ProCharger Stage II |305/45/17 DRs | Circle D 3500 stall | LT4 fueling | Custom made Lowside Aux Pump | Alky Control Meth | DSX E85
|
03-29-2020, 08:25 AM | #4 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
Yes, I'll do that today my bad. I'll get them loaded.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
03-29-2020, 10:04 AM | #5 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
I'll get the Piston part numbers and post those along with the crank and block.
Pistons are 10.5 to 1
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
Last edited by laynlo15; 03-29-2020 at 06:31 PM. |
03-29-2020, 06:33 PM | #6 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
Finally got some pics posted, sorry about the delay.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
03-29-2020, 07:33 PM | #7 |
Drives: 2016 Chevy Camaro 2SS Join Date: Aug 2012
Location: Atlanta, GA
Posts: 289
|
How much for valve springs?
|
03-29-2020, 08:53 PM | #8 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
https://www.livernoismotorsports.com/product/LPP811115 I believe they are the same spring as the ls7 which is LPP811113. They have the same specs.
These are the actual springs for the Lt1/Lt4 (450.00 new) I'll take $220.00 plus shipping which would probably be less the 15.00. They only thing you'll need are the seals. I will post those pictures tomorrow once I go out the my shop. Seals are pretty cheap.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
03-31-2020, 08:27 PM | #9 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
Rods are sold
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
04-03-2020, 06:58 AM | #10 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
Lower price on the Manley Piston. $400 plus shipping
Lower price on the Lt1 forge crank. 425 plus shipping Livernois Valve springs $200 shipped in USA
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
04-06-2020, 10:38 PM | #11 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
Make some offers
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
04-17-2020, 07:35 AM | #12 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
To the top to get these sold.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
05-08-2020, 07:33 PM | #13 |
Drives: Red Camaro Join Date: Dec 2017
Location: Los Angeles
Posts: 317
|
How much for the block?
Sent from my SM-N975U using Tapatalk |
05-11-2020, 06:11 AM | #14 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
Its too expensive to ship to LA, I've priced it out thru Ups and Fedx. Its ridiculous.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
Post Reply
|
Thread Tools | |
|
|