03-30-2017, 05:33 PM | #43 |
Drives: 2016 Camaro 1LT Join Date: Jan 2016
Location: California
Posts: 3,491
|
Just note that this (the 2.2kohm 1/4 watt resistor) wont work for blinkers. The resister used in reverse lights is just to compensate for the crappy reverse switch that leaks current when not closed.
The resisters on the blinkers are load resisters needed to deal with the hardcoded BCM that expects a certain load or it will hyperflash. |
03-30-2017, 05:41 PM | #44 |
Drives: Challenger SP Shaker/Arcadia Denali Join Date: Jan 2016
Location: New York City
Posts: 1,928
|
Yea i hear you on that. That resistor is working wonders on the Reverse LED is all i can care about. The blinkers colors suck and maybe soon someone will come up with a DIY for that too.
|
04-18-2017, 07:38 AM | #45 |
Drives: 2017 V6 Camaro RS Join Date: Feb 2016
Location: Atlanta, GA
Posts: 106
|
For those of you that have installed the Phastek kit, where did you position the heat wrapped resistor?
I installed mine last night and took some extra caution positioning it behind the light casing, but also to be between where water channels through the trunk and where water could get in through the small outside gap between the car body and light housing on the other side. |
04-26-2017, 05:09 PM | #46 |
2017 SS
|
Just got an email these are back in stock. Was able to order it before it sold out again.
|
05-22-2017, 09:55 AM | #47 |
Drives: 2002 Camaro SS Join Date: Jun 2012
Location: Evansville, Indiana
Posts: 526
|
I can't find these listed anywhere on the lighting section of Phasteks site. Anybody else? Edit: found it with a Google search. But says only for use on RS cars? Is that right?
__________________
2017 1SS Hyper Blue M6
2001 Ford Lightning Last edited by solobaric; 05-22-2017 at 10:08 AM. |
05-22-2017, 11:29 AM | #48 | ||
Drives: Camaro Coupé 2.0T AT8 (EU version) Join Date: Mar 2016
Location: Milan, Italy
Posts: 316
|
Quote:
http://www.phastekperformance.com/20...o-6-prled6.htm How to install it: See you!!, Eos |
||
03-28-2020, 05:53 AM | #49 |
Drives: 2020 2SS 1LE Join Date: Nov 2019
Location: ON
Posts: 22
|
Anyone else using the 2.2 ohm resistors with led bulbs? I want to put them in my 2020 Camaro. Post pics of how you wrapped the resistor on the bulb if you've done. How's the longevity? Is it worth it or just go with the more plug and play kit?
|
|
|
Post Reply
|
Thread Tools | |
|
|