09-17-2021, 08:29 AM | #1 |
BMR front and rear cradle braces
Does anyone know if the BMR cradle braces can be use with the zl1-1le solid lockout bushings?
|
|
09-17-2021, 09:51 AM | #2 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
I have them on mine which is a 1le, not sure if they work with aftermarket solid bushings. But they work with oem zl1 1le bushings
|
09-17-2021, 10:58 AM | #3 | |
Petro-sexual
|
Quote:
I believe the rear brace won't work, though, because of the eLSD controller being in the way.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
09-17-2021, 11:27 AM | #4 |
Drives: HBM ZLE Join Date: Aug 2017
Location: In the garage
Posts: 802
|
Yep, sorry I'm getting off a 12 hour night shift and didn't see you said rear brace also. I only have the front braces, like radz28 said the rear braces won't work from what I read
|
09-17-2021, 11:29 AM | #5 |
Drives: 2019 Camaro ZL1 // 1LE Join Date: Jan 2020
Location: Jacksonville, Florida
Posts: 151
|
Was considering adding this to my ZL1 1LE, so does the rear cradle brace bolt up, and do you feel like it made a difference. Someone just said the rear brace wont fit.
|
09-17-2021, 12:39 PM | #6 |
Drives: 2023 CT5 Blackwing Join Date: Sep 2016
Location: Orlando
Posts: 1,618
|
Front braces fit fine. Between the rear cradle bushings and the front cradle braces, why wheel hop is completely gone.
__________________
2017 HBM SS 1LE
Sold 2023 Wave Metallic CT5-V Blackwing M6 |
09-17-2021, 02:43 PM | #7 |
Drives: '86 IROC-Z '18 ZL1 Join Date: Jul 2019
Location: Arizona
Posts: 734
|
The rear brace won't work on a zl1 (or zl1-1le) but a front brace will fit fine. There is some Ect/controller or something like that on the zl1 rear end and that will cause the rear brace to not fit.
*that same ecu isn't present on ss's* |
|
|
Post Reply
|
|
|