01-23-2020, 08:54 AM | #1 |
Drives: Chevrolet Camaro 2SS Join Date: Jul 2019
Location: FL
Posts: 139
|
Brake Pedal wire for 2-step
Does anyone know how to tap into the brake pedal wire for the purposes of activating a two-step?
2019 camaro 2SS A-10 |
01-23-2020, 09:37 AM | #2 |
Drives: Turbo 6.2 Join Date: Feb 2019
Location: Buffalo
Posts: 702
|
I'll be doing this with my 16 next month. Should be a power wire off the pedal to tap into.
I did this on my old turbo truck. power off brake pedal -> toggle under the dash -> positive in wire on the 2 step This allows me to turn on the 2step by flipping the switch, otherwise itd be on every time i press the brake pedal. Not sure if thats ok or not but whatever.
__________________
2016 Turbo Camaro SS - 800hp/900tq 9.7@146
2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100 |
01-23-2020, 10:17 AM | #3 | |
Drives: Chevrolet Camaro 2SS Join Date: Jul 2019
Location: FL
Posts: 139
|
Quote:
|
|
01-24-2020, 08:06 AM | #4 |
Drives: Turbo 6.2 Join Date: Feb 2019
Location: Buffalo
Posts: 702
|
Come on... get out there and find out which wire it is for me.
__________________
2016 Turbo Camaro SS - 800hp/900tq 9.7@146
2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100 |
10-28-2021, 01:04 AM | #5 |
Drives: '21 M6 1SS 1LE Join Date: Aug 2021
Location: Chicago / St. Louis
Posts: 64
|
Did you ever figure it out? Also interested in putting a switch on my brake lights, albeit for a different reason
|
|
|
Post Reply
|
|
|