[willzilla]

Big 22% off sale today (2/22/22) on all QuickJack lifts so figured I'd make this post Anyways, I picked up the new for 2022 QuickJack 7000TLX and in this video I setup and install the lift in detail, install the QuickJack wall hangers, and do some test lifting of my 2021 Camaro ZL1! 24.5" lifting height and 7000lb capacity! Hopefully this video is useful to someone who may or may not be on the fence or is curious about the lift:



7000TLX Specs:

- TLX minimum lift point spread: 43"
- TLX maximum lift point spread: 66"
- TLX overall frame length: 76"
- Lifting capacity: 7,000 lbs
- Lowered height: 3.5"
- Lifting height w/2" block: 21.5"
- Lifting height w/3" block: 22.5"
- Max height: 24.5"
- Frame width (each): 12.5"
- Frame length (each): 76"
- Frame weight (each): 98lbs
- Time to full rise: 30 seconds



https://www.quickjack.com/car-lifts/

Today's (2/22/22) promo code is: TWOTWO

I have no association with QuickJack or anything like that other than having purchased one and getting the email today about the sale

[joekd]

Still tempted by the wall hangars, mine are currently leaning (and yes, strapped to prevent falling) on a back door of my garage that I use like 2-3X a year so not like they are in the way though, plus the door knob is a perfect place to store hoses

[willzilla]

Originally Posted by joekd

Still tempted by the wall hangars, mine are currently leaning (and yes, strapped to prevent falling) on a back door of my garage that I use like 2-3X a year so not like they are in the way though, plus the door knob is a perfect place to store hoses

They are pretty cheap and look nice They sent me an extra set on accident instead of my pinch weld blocks, lol, emailed them and they sent me the pinch weld blocks and told me to keep the extra set of wall hangers. If you swing on through south Texas (San Antonio area) I'll give them to ya haha.

[KirkH]

I have the 7000 SLX and with my aftermarket side skirts, I can't get the QuickJack under the car. I'm either going to have to remove the side skirts or figure a way to drive the car up on some blocks or something.

[willzilla]

Originally Posted by KirkH

I have the 7000 SLX and with my aftermarket side skirts, I can't get the QuickJack under the car. I'm either going to have to remove the side skirts or figure a way to drive the car up on some blocks or something.

What blocks are you using? And what side skirts are you running? The jack comes with medium and tall blocks and you can buy low profile blocks as well as pinch weld blocks. I'm able to fit car on with the medium blocks onto my zl1addons lift pads.

Sent from my SM-G998U using Tapatalk

[KirkH]

Originally Posted by willzilla

What blocks are you using? And what side skirts are you running? The jack comes with medium and tall blocks and you can buy low profile blocks as well as pinch weld blocks. I'm able to fit car on with the medium blocks onto my zl1addons lift pads.

Sent from my SM-G998U using Tapatalk

Yes I have tried the pinch weld blocks, as well as the zl1 addons lift pads, with the smallest blocks. I will try to get a photo tomorrow.


Works great on my Ram 1500 though!

[willzilla]

Originally Posted by KirkH

Yes I have tried the pinch weld blocks, as well as the zl1 addons lift pads, with the smallest blocks. I will try to get a photo tomorrow.


Works great on my Ram 1500 though!

Wild! Lol. Prob just need to grab a couple pieces of half inch wood or something and drive up on it and then lift lol.

Sent from my SM-G998U using Tapatalk

[KirkH]

Originally Posted by willzilla

Wild! Lol. Prob just need to grab a couple pieces of half inch wood or something and drive up on it and then lift lol.

Sent from my SM-G998U using Tapatalk

I have an extra set of LT take off wheels that I got on eBay new. My car has the 20" wheels. Im thinking the LT wheels, having a little more tire sidewall, might be enogh to get the QJ under.

[Puddin]

Originally Posted by KirkH

I have an extra set of LT take off wheels that I got on eBay new. My car has the 20" wheels. Im thinking the LT wheels, having a little more tire sidewall, might be enogh to get the QJ under.

What side skirts do you have? I'm using the Zl1 style skirt and have no issue getting my car up on the quickjack.

[KirkH]

Originally Posted by Puddin

What side skirts do you have? I'm using the Zl1 style skirt and have no issue getting my car up on the quickjack.

Camaro T6 Carbon Fiber Side Skirts Rocker Panels from Extreme Online Store

https://extremeonlinestore.com/collections/camaro-parts-accessories-2016-18/products/2016-up-camaro-lt-ls-rs-ss-t6-carbon-fiber-side-skirts-rocker-panels?variant=31862794649667