[wintertopdown]

Originally Posted by Emoto

How hard are they to remove? Are they bolted in place, or what?

They come off easily but you have to lay down on the ground

[VQ35DE]

Love my Race Ramps.

[Chutzpah]

Originally Posted by NeverDie

Just FYI, not everyone has to go "deep in debt" to buy a $400 product. ROFL

And if that's the case, one shouldn't own this type of vehicle in the first place.

Agreed ^^^^^ I paid $300+ for 10" Race Ramps ( 3 years ago) that are light, long and work for my 3 cars . I pay more than $400 for a monthly commuter pass and parking ( so in comparison, not a lot of $ for the ramps).

The only down side I see with foam ramps is you don't want to drop them near the leading edge, you may damage them. As well, I always sweep that area of driveway to clear any pebbles, they'll dent the foam. Mine look brand new after 30 +/- uses.

I slide a 5 gallon bucket under the car to capture all 10 quarts. Easy peasy...

[Dysan911]

After having watched this video years ago I made the same extenders and to this day I still have and use them regularly. They are not quite as convenient as just having the long Race Ramps but they work and easy to build.

[Tyrolblue67]

Originally Posted by Chutzpah

Agreed ^^^^^ I paid $300+ for 10" Race Ramps ( 3 years ago) that are light, long and work for my 3 cars . I pay more than $400 for a monthly commuter pass and parking ( so in comparison, not a lot of $ for the ramps).

The only down side I see with foam ramps is you don't want to drop them near the leading edge, you may damage them. As well, I always sweep that area of driveway to clear any pebbles, they'll dent the foam. Mine look brand new after 30 +/- uses.

I slide a 5 gallon bucket under the car to capture all 10 quarts. Easy peasy...

Can you please provide the Race Ramps model number that you have?
I presume they work for a ZL1?
I'm looking to purchase a set for oil changes on my ZL1.
I used the Race Ramp online calculator and they provide many model numbers that are possibilities.
I'm "thinking" the 56-race-ramp model would work?
I just would like to confirm what works.
Thanks,
Tyrolblue67

[Chutzpah]

These are the ramps I have. I’ll send a pic of the Z approach angle later today or tomorrow.

[Tyrolblue67]

Originally Posted by Chutzpah

These are the ramps I have. I’ll send a pic of the Z approach angle later today or tomorrow.

Thanks for the info.
I appreciate it.
Tyrolblue67

[djfury05]

I have the 56" Ramp Ramps that I paid $235 for off Amazon and my ZL1 drives up on them perfectly with no issues.

[Tyrolblue67]

Originally Posted by djfury05

I have the 56" Ramp Ramps that I paid $235 for off Amazon and my ZL1 drives up on them perfectly with no issues.

Do you have the model number?
Tyrolblue67

[Chutzpah]

Originally Posted by Tyrolblue67

Thanks for the info.
I appreciate it.
Tyrolblue67

As promised, here are the pics. As a note, for the ramps I have, you’ll either need use a small piece of carpet or rubber matting @ ~ 3/8” to the leading edge of the ramps. Otherwise, you may scrape the underside rubber air deflectors.

Good luck with whatever you choose.

[djfury05]

Originally Posted by Tyrolblue67

Do you have the model number?
Tyrolblue67

https://www.amazon.com/Race-Ramps-RR...gateway&sr=8-2

[Dysan911]

So if the 67in barely clears the lower air deflectors under the splitter, how the heck to do the 57in work?

[Tyrolblue67]

Originally Posted by djfury05

https://www.amazon.com/Race-Ramps-RR...gateway&sr=8-2

Thank you.
Tyrolblue67

[Chutzpah]

The angle of the 57” ramps @ 8” tall is exactly the same as 67” ramps @ 10” tall (10.8 degrees)

The only benefit of longer ramps is overall height.