08-02-2019, 02:50 PM | #43 |
UK2019
Drives: Camaro 2017 2ss/eu spec convertible Join Date: Mar 2019
Location: Uk
Posts: 100
|
I decided to go for non GM but oem spec lights. They fit perfectly, seem to be well made and were much cheaper brand new than used GM ones. Link to eBay https://rover.ebay.com/rover/0/0/0?m...2F192854544170
Contact Soleil (a member on this forum) for his diy guide. He's a very helpful guy. |
08-02-2019, 05:00 PM | #44 |
Makis
Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019
Location: London - UK
Posts: 806
|
Thank you. Great price by the way. Is it necessary to remove the bumper, or the installation is also possible through the wheel well liner?
|
08-02-2019, 06:17 PM | #45 |
UK2019
Drives: Camaro 2017 2ss/eu spec convertible Join Date: Mar 2019
Location: Uk
Posts: 100
|
I had the same thought and tried the wheel wel first. There's not enough room unfortunately so the bumper has to come off. It's by far the easiest car I've worked on to take the bumper off and went back on with perfect panel gaps, very quick and easy.
|
08-03-2019, 03:14 AM | #46 |
Drives: Camaro ZL1 Join Date: Apr 2019
Location: London, UK
Posts: 304
|
That's good to know - would really appreciate some tips as I'll be taking mine off as soon as it lands - if you're not, could you join up at https://www.facebook.com/groups/1778469565770046/
I'm sure there would be other members really interested!
__________________
Made in the USA. Refined in Great Britain - insta: zl1uk
Velossa intake, Rotofab, Mamo TB, Custom ported NX Lid & Jokerz Full tilt ported LT4 charger, 3 port CoolingMist Meth injection - ATI 15% lower pulley, E2X CC, TSP ceramic coated longtubes, de-cat and Borla 60608 to NPP box, JRE tune, BMR rear control & trailing arms, lock-out kit, lowering springs and front strut brace, Custom carbon trim interior, Xpel ultimate front PPF and Prestige window tint with Chameleon Windscreen tint...ever evolving... |
08-05-2019, 02:15 AM | #47 |
Makis
Drives: 2020 Red Hot ZL1 A10 Join Date: Apr 2019
Location: London - UK
Posts: 806
|
Has anyone the instructions on how to take the bumper off? Is there a link somewhere? Thanks
|
08-07-2019, 08:42 AM | #48 |
Drives: '18 2SS/EU (+Recaros) M6 Red Hot Join Date: Nov 2018
Location: Sweden
Posts: 260
|
Changed my oil to the new Mobil 1 ESP x3 0w-40 and a new genuine PF64 filter, at 13842 km, 58% oil life, new oil drain bolt gasket (new genuine o-ring), emptied catch can. Inspected front anti-roll bar links (which have been known to come loose) and rear half shaft bolts. Everything is good and tight
|
08-07-2019, 02:00 PM | #49 |
Drives: Camaro 50th anniversary edition Join Date: May 2017
Location: Europe
Posts: 2,203
|
Bought and installed 50th floor mats, AFM range and a new diffusor.
__________________
Soleil
_____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl) Last edited by Soleil; 08-07-2019 at 02:12 PM. |
08-08-2019, 06:31 AM | #50 |
Drives: '18 2SS/EU (+Recaros) M6 Red Hot Join Date: Nov 2018
Location: Sweden
Posts: 260
|
|
08-08-2019, 08:14 AM | #51 |
Drives: Camaro 50th anniversary edition Join Date: May 2017
Location: Europe
Posts: 2,203
|
Yeah, I like it as well. and here is a pic with the new diffusor.
__________________
Soleil
_____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl) |
08-16-2019, 04:49 PM | #52 |
Drives: '18 2SS/EU (+Recaros) M6 Red Hot Join Date: Nov 2018
Location: Sweden
Posts: 260
|
Crossed the Swiss alps for the first time in the Camaro. What a scenery.
|
08-30-2019, 08:56 AM | #53 |
UK2019
Drives: Camaro 2017 2ss/eu spec convertible Join Date: Mar 2019
Location: Uk
Posts: 100
|
Ss badges
In addition to the drl and the painted calipers, the badging it was meant to have has now been applied!
|
08-30-2019, 05:36 PM | #54 |
Drives: Camaro ZL1 Join Date: Apr 2019
Location: London, UK
Posts: 304
|
Wonder if that will fit a ZL1? Who makes it? I haven't seen that one - looks good!
__________________
Made in the USA. Refined in Great Britain - insta: zl1uk
Velossa intake, Rotofab, Mamo TB, Custom ported NX Lid & Jokerz Full tilt ported LT4 charger, 3 port CoolingMist Meth injection - ATI 15% lower pulley, E2X CC, TSP ceramic coated longtubes, de-cat and Borla 60608 to NPP box, JRE tune, BMR rear control & trailing arms, lock-out kit, lowering springs and front strut brace, Custom carbon trim interior, Xpel ultimate front PPF and Prestige window tint with Chameleon Windscreen tint...ever evolving... |
08-31-2019, 04:05 PM | #55 |
Drives: Camaro 50th anniversary edition Join Date: May 2017
Location: Europe
Posts: 2,203
|
Hi @Gary H,
It should fit as the rear bumper is the same. Have a look at Maxton Design
__________________
Soleil
_____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl) |
08-31-2019, 04:10 PM | #56 |
Drives: Camaro 50th anniversary edition Join Date: May 2017
Location: Europe
Posts: 2,203
|
Almost at the same time I changed my oil (3% oil life) at 13830 to ROWE 5W40.
__________________
Soleil
_____________________________________________ A car is fast enough, if you fear to unlock it in the morning." (Walter Roehrl) |
|
|
Post Reply
|
Tags |
camaro, europe, european |
|
|