Broken Moreno Motorsports Camber Plate - Page 5

Eric SS · 01-23-2018, 12:10 PM

I still have not received mine.

TEX1LE · 01-23-2018, 01:27 PM

Quote:

Originally Posted by Eric SS

I still have not received mine.

Me neither I got the tracking notification but nothing else.

7stringtheory · 01-23-2018, 05:31 PM

Quote:

Originally Posted by Eric SS

I still have not received mine.

Mine was delivered on saturday.

TEX1LE · 01-24-2018, 04:03 AM

Quote:

Originally Posted by Eric SS

I still have not received mine.

I sent Justin a text yesterday and he said he’ll look into it so you should be hearing from him soon.

Eric SS · 01-25-2018, 01:31 PM

Quote:

Originally Posted by TEX1LE

I sent Justin a text yesterday and he said he’ll look into it so you should be hearing from him soon.

OK awesome! I still don't have a tracking number or word. I'm patient.

Ryephile · 02-05-2018, 04:41 PM

Quote:

Originally Posted by Moreno Motorsports

Just an FYI for all, ...

Please clear your PM box, it's full.

Moreno1 · 02-06-2018, 05:39 PM

Freed up some room, sorry about that!

BTW, everyone should have replacement parts by now. let me know if you haven't received any

Justin

PolynesianPowerhouse · 02-06-2018, 05:46 PM

Good here. used a bolt and 35mm socket to pull em out. heated the new ones slightly and slowly tapped em in with a soft orange dead blow hammer.

Ryephile · 02-06-2018, 06:33 PM

Quote:

Originally Posted by PolynesianPowerhouse

Good here. used a bolt and 35mm socket to pull em out. heated the new ones slightly and slowly tapped em in with a soft orange dead blow hammer.

Thanks for the tips. That said, I'm guessing you warmed up the carrier, not the bearing.

NickyRacerBoy · 02-20-2018, 04:06 PM

Happy here so far with Justin.
Ordered just a couple of days ago and I will have package at my doorsteps tomorrow!

Can you guys that already have them installed post up your alignment specs?

Thanks

Nick

PolynesianPowerhouse · 02-20-2018, 04:11 PM

Quote:

Originally Posted by Ryephile

Thanks for the tips. That said, I'm guessing you warmed up the carrier, not the bearing.

FACT

TEX1LE · 04-17-2018, 07:59 AM

Hey everyone, I was hoping not to ever dig up this thread again but had an epic failure this morning. I went to the track last Tuesday and luckily didn't have any issues. I haven't driven my car since the track and when I put it on jack stands this morning to work on it both front struts fell out... blew my mind. I'm going back to stock it's not even worth trying anymore for time sake and most importantly safety. I highly advise anyone that has them to take them off and if you don't have them yet don't waste your money. Still in shock a little and beyond thankful that I didn't have an accident at the track.

Provoste · 04-17-2018, 08:22 AM

Quote:

Originally Posted by TEX1LE

Hey everyone, I was hoping not to ever dig up this thread again but had an epic failure this morning. I went to the track last Tuesday and luckily didn't have any issues. I haven't driven my car since the track and when I put it on jack stands this morning to work on it both front struts fell out... blew my mind. I'm going back to stock it's not even worth trying anymore for time sake and most importantly safety. I highly advise anyone that has them to take them off and if you don't have them yet don't waste your money. Still in shock a little and beyond thankful that I didn't have an accident at the track.

Oh boy. You're lucky indeed. If you guys want pointers on modifying OE SS 1LE struts to get -2.9 to 3.0 I could put together a DIY thread. Glad you caught this before heading back to the track.

LibertyHill · 04-17-2018, 08:46 AM

Is this with upgraded parts? Can you post more detailed pics of the failure after disassembly?

02-06-2018, 05:46 PM	#64
PolynesianPowerhouse Big Samoan ina little car Drives: 2016 camaro Join Date: May 2014 Location: Tofiga Island Posts: 1,872	Good here. used a bolt and 35mm socket to pull em out. heated the new ones slightly and slowly tapped em in with a soft orange dead blow hammer. __________________ Don't sit around and watch everyone else live YOUR dreams...DO SUMPT'N When I see posts asking "whats the best intake, exhaust, etc" .... the answer to that is like a grandfather telling his grandkids "if you put salt on a birds tail, it'll let you catch it" #ThinkAboutIt "Winning Tip: Don't take my (or anyone else's) word for it. GO TEST IT!" - Dennis Grant

04-17-2018, 07:59 AM	#68
TEX1LE Drives: 2017 1LE - Blue Join Date: May 2017 Location: Texas Posts: 220	Hey everyone, I was hoping not to ever dig up this thread again but had an epic failure this morning. I went to the track last Tuesday and luckily didn't have any issues. I haven't driven my car since the track and when I put it on jack stands this morning to work on it both front struts fell out... blew my mind. I'm going back to stock it's not even worth trying anymore for time sake and most importantly safety. I highly advise anyone that has them to take them off and if you don't have them yet don't waste your money. Still in shock a little and beyond thankful that I didn't have an accident at the track. Attached Images

04-17-2018, 08:46 AM	#70
LibertyHill Drives: 16 2SS 6MT NPP MRC / 15 K1300S Join Date: Mar 2016 Location: NW of Austin Posts: 1,034	Is this with upgraded parts? Can you post more detailed pics of the failure after disassembly? __________________ Rohana RFX-5 10/11, M/T 275/305, Eibachs, Hellwigs, Hurst SS, DMS LT4 SC 596HP/589TQ, DMS Low-side, Kooks 2LTs, MBRP Race, Rotofab, MMS CC

01-23-2018, 12:10 PM	#57
Eric SS #becauseracecar Drives: 2016 SS Sedan, 2016 Camaro SS Join Date: May 2015 Location: Phoenix Posts: 2,959	I still have not received mine.

02-06-2018, 05:39 PM	#63
Moreno1 Drives: G5.R Join Date: Sep 2010 Location: SoCal Posts: 2,377	Freed up some room, sorry about that! BTW, everyone should have replacement parts by now. let me know if you haven't received any Justin

02-20-2018, 04:06 PM	#66
NickyRacerBoy Drives: 1LE Join Date: Sep 2017 Location: East Coast Posts: 1,468	Happy here so far with Justin. Ordered just a couple of days ago and I will have package at my doorsteps tomorrow! Can you guys that already have them installed post up your alignment specs? Thanks Nick

User Name		Remember Me?
Password