04-14-2017, 11:27 AM | #1 |
Drives: 1968 Camaro SS 350 Join Date: Nov 2015
Location: Long Beach, CA
Posts: 243
|
Magnuson Self Install
Greetings everyone. After A LOT of research I decided to get Magnuson's Heartbeat Supercharger System. I got the complete kit with their in house tune. I will be installing it myself at work Only problem is trying to get the time off to do it. Can't wait for it to be done. One question I have is about mounting the new Elite E2-X catch can. Right now i have the Mishimoto catch can but the coolant reservoir for the new Maggie kit mounts in the location of the existing Mishimoto catch can. Anyone running a catch can with a Maggie? I probably won't be able to install it until the first week in May
I planned on leaving this car stock as it's my daily driver... well it stayed stock for a year and 4 months. That's long enough right?
__________________
1968 Camaro SS 350 Lemans Blue
-350 10.4:1 comp, Edelbrock Etec 200 heads, Comp XR288HR cam,AED750dp worked, Tremec TKO 600, console gauges w/tic toc tach, Moser 12 bolt, 4 wheel Willwoods Hyper Blue 2SS/6 speed, NPP, MRC, Nav, 5LQ 6 piston brakes, Black split spoke, Magnuson 2300 Heartbeat Supercharger, Flowtie upper grill |
04-14-2017, 12:25 PM | #2 |
|
Congratulations and best of luck on your install.
Sorry, I'm not the best at editing pictures, but I'd make an angle bracket that picked up the hole marked with the arrow. Then use the supplied bracket to mount the can where the circle is. The two would meet where the star is. Does that make sense?? Home Depot has some metal brackets that you can just drill up...
__________________
2016 2SS 6-Speed Manual... Magnetic Ride Control, Dual Mode Exhaust, Sunroof, Adrenaline Red Interior, Mylink W/Navigation
Added Edelbrock E-Force Supercharger, GM 1LE Sway Bars, BMR Upper/Lower Trailing Arms, BMR Upper Control Arms. BMR Front/Rear Chassis Braces, BMR Tunnel Brace. GM Red knee Pads, GM Black Front Splitter, GM SEMA Concept Grille, GM Dark Taillights, GM Ground Effects package... Savini Di Forza BM-14 Gloss Black Wheels 9's front, 10's rear. |
04-14-2017, 01:19 PM | #3 |
Drives: 1968 Camaro SS 350 Join Date: Nov 2015
Location: Long Beach, CA
Posts: 243
|
I think so yes... Thanks Techturtle. Very helpful.
Does anyone have a pic of one installed in this location?
__________________
1968 Camaro SS 350 Lemans Blue
-350 10.4:1 comp, Edelbrock Etec 200 heads, Comp XR288HR cam,AED750dp worked, Tremec TKO 600, console gauges w/tic toc tach, Moser 12 bolt, 4 wheel Willwoods Hyper Blue 2SS/6 speed, NPP, MRC, Nav, 5LQ 6 piston brakes, Black split spoke, Magnuson 2300 Heartbeat Supercharger, Flowtie upper grill |
04-14-2017, 02:07 PM | #4 |
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
Nice.
Can you give a few updates along the way when you get into it. Wouldn't mind knowing how difficult a project like this would be.
__________________
|
04-14-2017, 03:18 PM | #5 |
|
We'll be watching, take your time, it's not a race.
__________________
2016 Camaro 1SS, Red Hot, K&N Blackhawk intake, Whipple Supercharger, 3.125 pulley, Kooks 2" long tube headers, High flow cats, secondary cats delete, Mishimoto catch can, P3gauge, Lots of dress-up crap that don't make it go any faster.
Car Journal http://www.camaro6.com/forums/showthread.php?t=490975 SC build http://www.camaro6.com/forums/showthread.php?t=492656 Drive, Ride, Fly It Like You Stole It GO BIG OR GO HOME |
04-14-2017, 03:24 PM | #6 |
Drives: 1968 Camaro SS 350 Join Date: Nov 2015
Location: Long Beach, CA
Posts: 243
|
yea definitely... I am a home garage mechanic, like most of us. I restored the Camaro in my profile pic, never worked on too many modern cars like this but can't be too tough. I actually work at a Toyota dealership and we've installed plenty of TRD Superchargers ( which are Magnuson Superchargers) but my buddies here have never installed one on a real muscle car/sports car like this. Seems like my coworkers are almost as excited as I am!
__________________
1968 Camaro SS 350 Lemans Blue
-350 10.4:1 comp, Edelbrock Etec 200 heads, Comp XR288HR cam,AED750dp worked, Tremec TKO 600, console gauges w/tic toc tach, Moser 12 bolt, 4 wheel Willwoods Hyper Blue 2SS/6 speed, NPP, MRC, Nav, 5LQ 6 piston brakes, Black split spoke, Magnuson 2300 Heartbeat Supercharger, Flowtie upper grill |
04-14-2017, 09:09 PM | #7 |
Twin Turbo
Drives: 2016 2SS Join Date: Jul 2016
Location: Illinois
Posts: 290
|
I've been working on my install since the middle of March lol Unfortunately I get about 2hrs a day to work on it depending on the time I get off. I have the same can and as soon as I finish my headers I will be mounting it on the passenger side next to the coolant reservoir.
Some advice that might be helpful during your install Skip step # 19 its not necessary they will stay in place on the fender on there own. Step #116 specs have changed from .248 - .314 depth ask me how I know. Step #154 I was able to avoid that step all together.
__________________
Boost, Boost & More Boost
Instagram = BoostedSS |
04-14-2017, 09:22 PM | #8 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Enjoy the new power and I love mine. Look at my stats and that's what you can expect. I'm going to the track again and plan to run 10.50's. Only mods are Heartbeat, pray tb, drag pack and CAI. Its so much fun to have a 10 sec car and drive it to work. Hell yes. If you have any questions let me know.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
04-15-2017, 05:57 PM | #9 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Keep us posted on your progress.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
04-16-2017, 03:44 PM | #10 | |
Drives: 2015 C7 Z06 M7 Join Date: Dec 2012
Location: So-Cal
Posts: 654
|
Quote:
|
|
04-16-2017, 06:49 PM | #11 | |
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
Quote:
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
|
04-16-2017, 09:18 PM | #12 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Good idea on the heat gun. I'll keep that sticky in the back of mine mind in case anyone ever asks.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
04-17-2017, 11:24 AM | #13 | |
Drives: 1968 Camaro SS 350 Join Date: Nov 2015
Location: Long Beach, CA
Posts: 243
|
Quote:
__________________
1968 Camaro SS 350 Lemans Blue
-350 10.4:1 comp, Edelbrock Etec 200 heads, Comp XR288HR cam,AED750dp worked, Tremec TKO 600, console gauges w/tic toc tach, Moser 12 bolt, 4 wheel Willwoods Hyper Blue 2SS/6 speed, NPP, MRC, Nav, 5LQ 6 piston brakes, Black split spoke, Magnuson 2300 Heartbeat Supercharger, Flowtie upper grill |
|
04-17-2017, 12:36 PM | #14 |
FMPG
Drives: 2016 2SS Join Date: Dec 2015
Location: CT
Posts: 1,888
|
I've just got the Mishimoto catch can still on mine, but had to use a custom bracket. It's also not sitting in the same location - it's up front on the passenger's side. I helped another person from the forum with pictures and will check to see if I still have them. I apologize but they're not the best. It's very tight under there and difficult to see exactly where the hoses connect once you have the Maggie installed. I'm not really seeing all that much being picked up by mine either.
__________________
Ordered 3/8/16- NFG/Ceramic White, M6, MRC, NPP, 6 pots, blk blade, no sunroof, blk splitter, blk bow ties, dark tails, nav.
ARH 1 7/8" ceramic coated full sys w/NPP; Maggie 9.2psi (85mm); Jannetty rough idle cam(TSP), tune and LT4 fuel system; Forgeline VX1 Black PVD (20x10,11); R88R 315's; ALPriority; BMR rear arms, bushings, DS loop; RF intake (red); nGauge 93 octane: 712rwhp, 654rwtq / E85 (E66 mix): 734rwhp, 674rwtq (SuperFlow Dyno) |
|
|
Post Reply
|
|
|