12-03-2022, 07:16 AM | #1 |
Drives: Rapid Blue 2023 2ss 1LE Join Date: Sep 2022
Location: Niagara, Ontario Canada
Posts: 131
|
Factory Wireless Charger
Im curious if anyone elses phone is just to large to charge on the wireless charger?
The phone will sit on an angle because of the length of it compared to the little inlet for the phone to sit. Anyones phone still able to charge like that? I dont really have a smaller phone to test that out on. Otherwise i might be searching for a phone that will 100% fit in there and charge lol Just curious as to what others have had to do. Or is it something that needs to be turned on in a setting somewhere? I am currently going through the owners manual but i havent found anything yet.
__________________
Mike
1981 Camaro Bahama Blue. 510BigBlock 2023 Rapid Blue 2SS 1LE ---------------------------------------------- 1100 - 08/29/2022 ----------------------- 4000 - 11/03/2022 Vehicle Available to Ship 2000 - 09/12/2022 ----------------------- 4V03 - 11/20/2022 Estimated Delivery Date 3000 - 09/27/2022 TPW-10/24/2022 ----5000 - 11/16/2022 Arrived at Dealership 3800 - 11/03/2022 Vehicle Produced ----6000 - 12/01/2022 Customer Picked Up Vehicle |
12-03-2022, 08:17 AM | #2 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,616
|
Even if the phone does charge, it will bounce around if it isn't sitting on the rubber mat.
What I did about the same problem in addition to upgrading to the higher spec 2019+ wireless module was trimming the shorter ends the rubber, see below, which allowed my phone to fit. (The light gray color along the surface of the cut is just the phone's camera playing tricks, it's the same color as the pad.) The wireless charging pad design in this car is quite shortsighted, unfortunately.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
12-03-2022, 09:15 AM | #3 |
|
I'm surprised no one makes a replacement that will fit larger phones.
__________________
'22 2SS | Wild Cherry Tintcoat | Design Package 3 | NPP | MRC | A10 | NAV | Ceramic Coating | Full Frontal PPF | New Hood and Side Stripes | Michelin PS AS 4
Range AFM Disabler | Mishimoto Catch Can | Diode Dynamics side markers | Cold Air Inductions CAI | LLoyd Velourtex front/trunk mats with Camaro SS logo ZL1addons Deluxe Rock Guards, Stealth Lift Pads, and Tow Hook | Escort MAXcam360c | Footwell Lighting | Banks gauges in ZZPerformance pillar pod | Paddle shifter extensions |
12-03-2022, 09:58 AM | #4 | ||
Drives: Rapid Blue 2023 2ss 1LE Join Date: Sep 2022
Location: Niagara, Ontario Canada
Posts: 131
|
Quote:
Quote:
__________________
Mike
1981 Camaro Bahama Blue. 510BigBlock 2023 Rapid Blue 2SS 1LE ---------------------------------------------- 1100 - 08/29/2022 ----------------------- 4000 - 11/03/2022 Vehicle Available to Ship 2000 - 09/12/2022 ----------------------- 4V03 - 11/20/2022 Estimated Delivery Date 3000 - 09/27/2022 TPW-10/24/2022 ----5000 - 11/16/2022 Arrived at Dealership 3800 - 11/03/2022 Vehicle Produced ----6000 - 12/01/2022 Customer Picked Up Vehicle |
||
12-03-2022, 10:47 AM | #5 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,616
|
It's GM part number 84526978 (or 19421449).
FYI I've also attached the last wireless charger compatibility list I used, there might have been updates to it since then.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
12-10-2022, 03:49 PM | #6 | |
Drives: 2022 2SS Convertible Join Date: May 2011
Location: Ontario
Posts: 96
|
Just wanted to say thanks for the hack! My iPhone 12 finally fits. Everyone with a phone that’s todays size should do this.
Quote:
|
|
12-10-2022, 05:59 PM | #7 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,616
|
Glad to hear it worked for you, too
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
12-13-2022, 05:00 AM | #8 |
Drives: Rapid Blue 2023 2ss 1LE Join Date: Sep 2022
Location: Niagara, Ontario Canada
Posts: 131
|
Same thanks!
it blows my mind that they didnt make it long enough to fit. Suck cutting it up but heck it works now!
__________________
Mike
1981 Camaro Bahama Blue. 510BigBlock 2023 Rapid Blue 2SS 1LE ---------------------------------------------- 1100 - 08/29/2022 ----------------------- 4000 - 11/03/2022 Vehicle Available to Ship 2000 - 09/12/2022 ----------------------- 4V03 - 11/20/2022 Estimated Delivery Date 3000 - 09/27/2022 TPW-10/24/2022 ----5000 - 11/16/2022 Arrived at Dealership 3800 - 11/03/2022 Vehicle Produced ----6000 - 12/01/2022 Customer Picked Up Vehicle |
12-13-2022, 11:41 AM | #9 |
Drives: 2021 3LT RS A10 Join Date: Nov 2021
Location: South Sound, Washington
Posts: 438
|
what did you use to trim it with? How did you remove the unit?
|
12-13-2022, 07:54 PM | #10 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,616
|
You can simply lift the rubber pad with a plastic trim tool or maybe even just your nails, it isn't attached to the plastic tray. I trimmed it with an x-acto knife.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
12-14-2022, 10:09 AM | #11 |
Drives: 23 ZL1 A10 Rapid Blue Join Date: Aug 2020
Location: MO
Posts: 1,992
|
I'm going to try this trim modification but the thing I've not really seen it as more than a impractical gimmick due to it's location for the most part. No way it will ride there the way that I drive LOL
|
12-14-2022, 12:57 PM | #12 |
Drives: 2021 3LT RS A10 Join Date: Nov 2021
Location: South Sound, Washington
Posts: 438
|
Agreed, lol
|
12-14-2022, 01:06 PM | #13 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,616
|
Quote:
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
12-14-2022, 01:12 PM | #14 |
Old Gearhead
Drives: 2023 GMC Sierra Denali Ultimate Join Date: Nov 2018
Location: MI
Posts: 546
|
This might be a springtime mod. Although I have a legit wireless charger in my 2021 F150 that really don't use much. I have an S22 Ultra that's big and I doubt the "mod" would work for mine.
__________________
2023 Camaro ZL1 convertible - black - SOLD
2023 GMC Sierra Denali Ultimate - black |
|
|
Post Reply
|
|
|