El Paso Chapter of Camaro5 - Page 517 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

K1SSRSS · 11-13-2014, 11:00 AM

Quote:

Originally Posted by SSPUNISHER

No I have not replaced the fuel pump, I going to replace it and gears and get it tuned when all that is done. I used the tune that came with it. and I notice the difference all ready. Holy hell does it pull like crazy. I love the way its performing all ready. Going to leave it like that until I put the fuel pump and rear gears in it when I come home next year. By then Ill have the functional hood on it to keep it cooler in the engine bay. holy crap it get hot in there with that supercharger. Should be going to the track this weekend see what it does. If anyone wants to get together this weekend it be cool..... Yeah I was happen when I realized I didn't have to mess with that valley tray gasket and modify it. That's only for automatic....

Let me know when your planning on heading out there, 5th gen is in shambles right now trying to get the drivetrain sorted out, but I wouldn't mind getting a base line run on the 4th gen before I start work on it. On that note, does anybody have an idea on who may have some 16'' drag radials in stock?

jose1003 · 11-13-2014, 04:01 PM

was it hard to install the SC,

zl1 bee · 11-14-2014, 02:27 PM

Hey what's up ss punisher I'll be at the drags at 730 tonight see u there

K1SSRSS · 11-14-2014, 03:04 PM

Quote:

Originally Posted by zl1 bee

Hey what's up ss punisher I'll be at the drags tonight see u there

What time you guys heading over?

zl1 bee · 11-14-2014, 04:51 PM

At 730

K1SSRSS · 11-14-2014, 04:58 PM

Quote:

Originally Posted by zl1 bee

At 730

Eeek that's kind of early, are there races tomorrow also?

zl1 bee · 11-14-2014, 05:07 PM

Nope jus today from 8-12

K1SSRSS · 11-14-2014, 05:09 PM

Dam, well maybe I can get the oil changed and car loaded by then, but if not you'all have fun out there.

SSPUNISHER · 11-14-2014, 05:14 PM

Quote:

Originally Posted by jose1003

was it hard to install the SC,

No it was not hard at all..... Just need to get it tuned....

SSPUNISHER · 11-14-2014, 05:16 PM

Quote:

Originally Posted by zl1 bee

Hey what's up ss punisher I'll be at the drags at 730 tonight see u there

was thinking of going out there..... I went and dyno my car today. And im going to have to get it tuned so that I can push what its able to do.... If I do go out there, I'll see you there.....

zl1 bee · 11-14-2014, 05:30 PM

Ok cool

14DPTcamaro1le · 11-16-2014, 07:25 PM

what were your dyno numbers at?

xfactors · 11-17-2014, 11:51 AM

My brother-in-law used the kit from this site, to wax his 2013 ZL1 Camaro, and he was very happy with the result. Said it was very easy to put on, and wipe off. He bought an extra kit for his son, to use on his 2014 GT mustang. I'm going to get the kit to try on my vette. I haven't found a wax that's easy to get off, and I'm hoping this kit will solve the problem. I think you have to spray on the cleaner, before you put on the wax, or the wax will leave streaks. (I haven't used this product yet, so really don't know what the hell I'm talking about. I just read this in one of the reviews of this product.) Anyway, I'll post results when I try this product out. I don't know when that will be. It's too cold right now to mess with it.

http://www.waxdirect.com/scripts/openextra.asp?extra=11

xfactors · 11-17-2014, 12:22 PM

I like this video comparing 2015 Camaro SS to 2015 GT mustang.

11-13-2014, 04:01 PM	#7226
jose1003 Drives: 2010 Camaro 2SS Cyber Gray Join Date: Jul 2009 Location: El Paso, Texas Posts: 1,132	was it hard to install the SC, __________________

11-14-2014, 02:27 PM	#7227
zl1 bee Drives: Super Bee Join Date: Mar 2014 Location: Ep Tx Posts: 222	Hey what's up ss punisher I'll be at the drags at 730 tonight see u there Last edited by zl1 bee; 11-14-2014 at 03:12 PM.

11-14-2014, 05:09 PM	#7232
K1SSRSS Chief Many Camaros Drives: A paid off Camaro!!! Join Date: Mar 2009 Location: Las Cruces, NM Posts: 1,863 View My Garage	Dam, well maybe I can get the oil changed and car loaded by then, but if not you'all have fun out there. __________________ 504hp/478tq Performance: Kooks LT, 3'' Exhaust, V-Max TB, Roto-Fab CAI, Custom Ported/Port Matched Heads and Intake Suspension: BMR Adjustable LCA's, BMR Trailing Arms, Poly Bushings, BMR Toe Rods Coming Soon (still in the box): Procharger F1R, G-Force Axles, 3:91 gears w/Eaton Truetrac

11-16-2014, 07:25 PM	#7236
14DPTcamaro1le Drives: 2014 2SS RS 1LE Join Date: May 2014 Location: el paso, tx Posts: 114	what were your dyno numbers at? __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
South East Camaro5 Chapter Meet	GTAHVIT	USA - Southeast	238	05-25-2010 04:01 PM
What VIN is yours?	UCF w00t	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	346	03-29-2010 05:55 PM
Laws Protecting Consumers for Aftermarket Parts	strauchpete	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	9	01-17-2010 08:31 AM
IMPORTANT Part 1 Warranty Disputes	Zeus	Camaro Issues / Problems \| Warranty Discussions \| TSB and Recalls	11	08-25-2009 11:37 AM
Pre-packaged chap11, sounds like a good plan	Design1stCode2nd	General Automotive + Other Cars Discussion	2	11-26-2008 10:03 PM

11-14-2014, 04:51 PM	#7229
zl1 bee Drives: Super Bee Join Date: Mar 2014 Location: Ep Tx Posts: 222	At 730

11-14-2014, 05:07 PM	#7231
zl1 bee Drives: Super Bee Join Date: Mar 2014 Location: Ep Tx Posts: 222	Nope jus today from 8-12

11-14-2014, 05:30 PM	#7235
zl1 bee Drives: Super Bee Join Date: Mar 2014 Location: Ep Tx Posts: 222	Ok cool

11-17-2014, 11:51 AM	#7237
xfactors Drives: 2014 2LT vette with Z51 Join Date: Jun 2012 Location: el paso tx Posts: 255	My brother-in-law used the kit from this site, to wax his 2013 ZL1 Camaro, and he was very happy with the result. Said it was very easy to put on, and wipe off. He bought an extra kit for his son, to use on his 2014 GT mustang. I'm going to get the kit to try on my vette. I haven't found a wax that's easy to get off, and I'm hoping this kit will solve the problem. I think you have to spray on the cleaner, before you put on the wax, or the wax will leave streaks. (I haven't used this product yet, so really don't know what the hell I'm talking about. I just read this in one of the reviews of this product.) Anyway, I'll post results when I try this product out. I don't know when that will be. It's too cold right now to mess with it. http://www.waxdirect.com/scripts/openextra.asp?extra=11