Wire harness relocation with 11" wheels and 30/30?

Village Idiot · 02-23-2021, 02:25 PM

I just ordered my wheels (20x11 rears planning on 305/30) and I was reading in the rear you should relocate the wire harness behind the wheel well apparently? Anyone know if this is actually needed?

Only reason I ask, I had to ship the wheels and tires to a GM dealer. I don't want anyone else lifting the car because last time the car was on a lift at a non-GM place they ****** up my door and I didn't realize until it was too late.

I doubt the dealer would want to move the harness for me or even have any idea what I'm talking about.

NYblack1le · 02-23-2021, 03:59 PM

Depending on the wheel offset, thats the stock 1le size. Shouldn’t require to move harness. Get the offset specs.

Trochoidal · 02-23-2021, 05:13 PM

I moved the harness just to be safe. It wasn’t very time consuming and not difficult.

https://www.camaro6.com/forums/showthread.php?t=485975

arpad_m · 02-23-2021, 05:17 PM

Quote:

Originally Posted by NYblack1le

Depending on the wheel offset, thats the stock 1le size. Shouldn’t require to move harness. Get the offset specs.

^^^

305/30/20 should be fine with the OEM 1LE offset or even slightly more, but do post yours or check the details yourself at https://www.wheel-size.com.

02-23-2021, 02:25 PM	#1
Village Idiot Drives: 2019 Camaro SS Join Date: Nov 2020 Location: Pennsylvania Posts: 208	Wire harness relocation with 11" wheels and 30/30? I just ordered my wheels (20x11 rears planning on 305/30) and I was reading in the rear you should relocate the wire harness behind the wheel well apparently? Anyone know if this is actually needed? Only reason I ask, I had to ship the wheels and tires to a GM dealer. I don't want anyone else lifting the car because last time the car was on a lift at a non-GM place they ****** up my door and I didn't realize until it was too late. I doubt the dealer would want to move the harness for me or even have any idea what I'm talking about.

02-23-2021, 05:13 PM	#3
Trochoidal Drives: 2017 Camaro 2SS A8 Join Date: May 2019 Location: USA Posts: 1,656	I moved the harness just to be safe. It wasn’t very time consuming and not difficult. https://www.camaro6.com/forums/showthread.php?t=485975 __________________ Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“

02-23-2021, 03:59 PM	#2
NYblack1le Drives: 2018 1SS 1LE Join Date: Dec 2012 Location: NY Posts: 395	Depending on the wheel offset, thats the stock 1le size. Shouldn’t require to move harness. Get the offset specs.

User Name		Remember Me?
Password