Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Suspension | Brakes | Chassis


Phastek Performance


Post Reply
 
Thread Tools
Old 04-25-2021, 08:46 AM   #1
joekd
 
Drives: 2018 Camaro SS vert
Join Date: Oct 2020
Location: CT
Posts: 448
Changed Brembo pads for Z26 powerstops

I couldn't deal with the Brembo dust anymore and swapped out my pads for Powerstop Z26's front and back

The change is VERY easy, tools used were a punch, hammer, pliers (to remove the pins holding in the pads) small pry bars (to compress calipers) and of course a can of brake clean. Tap out pins, pull pads, clean, compress calipers, put squishy stuff on pad backs, reassemble. The Powerstops even come with new spring clips so you can toss the OEMs in the trash with the pads.

Yesterday I had to car out for a 150+ mile trip and this is how my front rims look. Any reduction in braking power was minimal and since I never see my convertible making a full HPDE track day will be fine for me.
Attached Images
 
__________________

Last edited by joekd; 05-11-2021 at 01:51 PM. Reason: spelling
joekd is offline   Reply With Quote
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:30 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.