Texas Speed Stage 2 Cam

Liquidstone · 04-20-2021, 12:44 PM

Hey guys hope everyone is keeping safe and soon we can put all this covid-19 stuff behind us.
I'm working with my local tuning shop here in British Columbia RG racing. They are a licensed TSP distributer. Anywho I have pulled the trigger on a complete stage 2 cam kit for my vehicle. I have also upgraded the lifters to Johnson Moral as supposed to LS7. Before deciding this purchase, I reached out to Vengence Racing, WeaponX and requested there Cam specs just as comparison. Through this process I have learned that there is very little difference in cam specs between the 3, and they even use TSP to cut there cams.

My question is does anyone have any experience with TSP cams, installed in there ZL1 and what kind of power gains did you receive.

Note my current build list for comparison.

- ported factory blower
- LT5 TB
- Roto Fab intake
- kooks 1 7/8" LT
- Flex fuel sensor
- 2.3 upper pulley
- thermostat and plugs
- custom tune

Also if anyone has any sound clips?(of TSP Cam) that would be great!

Thx again guys and truly appreciate the support and camaro community!

IneedAZ · 04-20-2021, 02:10 PM

Not exactly answering your question, but food for thought...

I had thought about going TSP, but was disappointed at the time they didn't have a larger Fuel lobe avail. I believe it is 32%.

Does your shop carry BTR? They have a 38% lobe which will help you with WOT fuel pressure.

Liquidstone · 04-20-2021, 02:24 PM

Yes you are correct the cam profile is 32%. However it's too late now. The kit has been ordered :(
I'm sure I could have ordered a BTR cam seperatly at the time.

Markoz28 · 04-23-2021, 06:06 AM

Have no experience with TSP but I’d imagine you should pick up 40-60whp. Should be a 700+ whp car.

Liquidstone · 05-01-2021, 08:24 AM

Quote:

Originally Posted by Markoz28

Have no experience with TSP but I’d imagine you should pick up 40-60whp. Should be a 700+ whp car.

That would be the goal! Current setup has me at 668whp, 665wtq on e33

04-20-2021, 12:44 PM	#1
Liquidstone Drives: 2018 ZL11LE Join Date: Feb 2019 Location: Vancouver B.C. Posts: 84 View My Garage	Texas Speed Stage 2 Cam Hey guys hope everyone is keeping safe and soon we can put all this covid-19 stuff behind us. I'm working with my local tuning shop here in British Columbia RG racing. They are a licensed TSP distributer. Anywho I have pulled the trigger on a complete stage 2 cam kit for my vehicle. I have also upgraded the lifters to Johnson Moral as supposed to LS7. Before deciding this purchase, I reached out to Vengence Racing, WeaponX and requested there Cam specs just as comparison. Through this process I have learned that there is very little difference in cam specs between the 3, and they even use TSP to cut there cams. My question is does anyone have any experience with TSP cams, installed in there ZL1 and what kind of power gains did you receive. Note my current build list for comparison. - ported factory blower - LT5 TB - Roto Fab intake - kooks 1 7/8" LT - Flex fuel sensor - 2.3 upper pulley - thermostat and plugs - custom tune Also if anyone has any sound clips?(of TSP Cam) that would be great! Thx again guys and truly appreciate the support and camaro community!

04-20-2021, 02:10 PM	#2
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	Not exactly answering your question, but food for thought... I had thought about going TSP, but was disappointed at the time they didn't have a larger Fuel lobe avail. I believe it is 32%. Does your shop carry BTR? They have a 38% lobe which will help you with WOT fuel pressure. __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

04-20-2021, 02:24 PM	#3
Liquidstone Drives: 2018 ZL11LE Join Date: Feb 2019 Location: Vancouver B.C. Posts: 84 View My Garage	Yes you are correct the cam profile is 32%. However it's too late now. The kit has been ordered :( I'm sure I could have ordered a BTR cam seperatly at the time.

04-23-2021, 06:06 AM	#4
Markoz28 Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018 Location: RGV Texas Posts: 1,527	Have no experience with TSP but I’d imagine you should pick up 40-60whp. Should be a 700+ whp car.

User Name		Remember Me?
Password