01-29-2020, 10:02 PM | #1 |
Drives: 2018 2ss 1le Join Date: Jan 2018
Location: Huntington, NY
Posts: 474
|
road racing car with aftermarket blower...
how many guys here road race their cars with an aftermarket blower...
how is heat, controllability (not a word but you know what I mean) and reliability... I worry that my stability control wont be able to keep up with the added power and that heat will be an issue.. I am running an e force 2300 with intercooler and tuned by janetty (see sig)
__________________
2018 2ss 1le roto fab dry, Stainless works 1 7/8 lt to 3'" x pipe with highflow cats to stock npp, soler 95mm t/b, edelbrock 2300, LT4 fueling , jms bap and dsx flex fuel, 618/620 on e45 rwhp
Jannetty Motorsports tuned |
01-29-2020, 11:46 PM | #2 |
Drives: 18 1SS 1LE HyperBlue Join Date: Aug 2018
Location: Twin Cities, MN
Posts: 612
|
Well at Brainderd Int Raceway during PowerCruise last year I could run my car as many laps as I wanted for as long as I wanted with 9ish lbs of boost (Novi 1500 Centrifugal with Air / Air intercooler) however I run E85 and a spray some meth on the very top end.
If not used for additional fueling, but to help with temp control (IAT temps) doing meth & water might be an option for you. Again, not heaps of it to make up for a lack of fuel supply, but like one 10 or 20lb nozzle. IE - with my setup it can pull IATs down substantially in a short amount of time
__________________
2018 1SS 1LE / HBM - ECS Novi 1500 S/C Tuned by Carl @ CJ Tunes
|
01-31-2020, 10:41 PM | #3 |
Drives: 2018 2ss 1le Join Date: Jan 2018
Location: Huntington, NY
Posts: 474
|
so nobody else?
__________________
2018 2ss 1le roto fab dry, Stainless works 1 7/8 lt to 3'" x pipe with highflow cats to stock npp, soler 95mm t/b, edelbrock 2300, LT4 fueling , jms bap and dsx flex fuel, 618/620 on e45 rwhp
Jannetty Motorsports tuned |
02-01-2020, 04:04 AM | #4 |
Drives: 2017 Camaro ZL1 Join Date: Sep 2019
Location: Kuwait
Posts: 13
|
Actually u can control ur torque delivery via hptuners along with tcs. U can ask ted to do his magic with ur vehicle.
How much torque ur car is making ? |
02-01-2020, 06:59 AM | #5 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
I don't know how many we sold but there are a bunch of Zl1's that have swapped out their Lt4s for either the 2300 or 2650. Many did it for power but the intake temps were probably a big factor.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
02-01-2020, 07:39 AM | #6 |
Drives: 2018 2ss 1le Join Date: Jan 2018
Location: Huntington, NY
Posts: 474
|
torque was 580
I am concerned mostly about driveability and reliability. I went to ted because I trusted that he was among the best tuners. he said he tuned my car conservatively and that my motor should be safe, I just wonder how many people road race on a setup like this , as I am sure 1/4 mile passes would never give me an issue but a day of road racing could be a whole different game … and of those people who do this with a similar setup is it TOO MUCH at the track... ( I am going to pick up one of those p3 vent gauges so I can keep an eye on some of these things while driving)
__________________
2018 2ss 1le roto fab dry, Stainless works 1 7/8 lt to 3'" x pipe with highflow cats to stock npp, soler 95mm t/b, edelbrock 2300, LT4 fueling , jms bap and dsx flex fuel, 618/620 on e45 rwhp
Jannetty Motorsports tuned |
02-01-2020, 08:24 AM | #7 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
I have several all day track sessions on my car, including some when the ambient temperature was in the 90`s - think 2019 CamaroFest. No issues at all with temperature. I usually run e60 but have also ran quite a bit on 93 due to a lack of e85 availability at some tracks. I'm running Goodyear supercar3's in ZL1/1LE size and the car is plenty controllable, it's a blast on the track, I can't wait for warmer weather so I can get back out there!
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
02-01-2020, 08:37 AM | #8 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,218
|
Quote:
The saying goes, Race it, Break it, Fix it, repeat. If you want to never break your car leave it in the garage you get a lifetime warranty LOL. However we take every precaution when building and tuning these cars for long life in road race conditions. Cheap insurance is 5 gallons of 100 octane unleaded race gas, or a can of Torco with every tank full when racing on the road coarse. Because you have no way to test the fuel you buy at the pump for octane and age. Thank you for your business, and please don't ever hesitate to call me with any concerns, I am always happy to take calls. Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
02-01-2020, 09:44 AM | #9 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
Hey Ted, would i be safer on torco or 5 gals of race fuel vs. E60 for track days?
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
02-01-2020, 09:46 AM | #10 |
Drives: 2018 2ss 1le Join Date: Jan 2018
Location: Huntington, NY
Posts: 474
|
hey ted...
I was waiting for it to get a little warmer and a little more seat time in before I called you... ( I do have a slew of questions) let me quickly take the time to say what a great operation ted has up there in Connecticut, and I am very glad you steered me in the directions you did even if it cost me a little extra.. fuel system and all.... what do you think of the boostane as a small measure of insurance one bottle raises tank 2 to 3 points.... I also invested in the "ram air" piece to help bring down iats's(as you know I don't want to go e85).. and of course I know racing the car you take a risk, I just wanted to see other people with similar setups and their experience with road racing like that..
__________________
2018 2ss 1le roto fab dry, Stainless works 1 7/8 lt to 3'" x pipe with highflow cats to stock npp, soler 95mm t/b, edelbrock 2300, LT4 fueling , jms bap and dsx flex fuel, 618/620 on e45 rwhp
Jannetty Motorsports tuned Last edited by biker2k; 02-01-2020 at 09:59 AM. |
02-01-2020, 10:15 AM | #11 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,218
|
Quote:
E-60 is king.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
02-01-2020, 10:16 AM | #12 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,218
|
Quote:
Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
02-01-2020, 04:45 PM | #13 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
I'm loving my E60 Ted, but will keep a few cans of Torco on hand for when i run low on fuel and can't find e85.
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
02-03-2020, 08:12 AM | #14 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,218
|
Great practice.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
|
Post Reply
|
Thread Tools | |
|
|