You are browsing camaro6 
09-30-2017, 07:56 AM
|
#1 |
 
Drives: 2019 Red Hot ZL1 1LE: 2012 RAM 2500 Join Date: Mar 2012
Location: DeRidder, LA
Posts: 711
|
Replica ZL1 rims
20x9.5 Wheel Offset 40 Bolt Pattern 5-120 Hub Size 67.1 Back Spacing 6.82 This is what I am wanting to run on my 17 1SS on all 4 corners plus I want to put 285/35-20's on them, what kind of issues would I run into on the front's or any where else. |
|
|
|
09-30-2017, 10:03 AM
|
#2 |
|
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
Too close to strut....well it would hit the strut before you could mount it
 Need a 15mm spacer up front to clear.
__________________
|
|
|
|
|
09-30-2017, 10:31 AM
|
#3 |
|
Drives: 2019 Red Hot ZL1 1LE: 2012 RAM 2500 Join Date: Mar 2012
Location: DeRidder, LA
Posts: 711
|
Wouldn't I need a hub centric wheel spacer? and a 15mm spacer would be thick.
|
|
|
|
|
09-30-2017, 10:36 AM
|
#4 |
|
davet
Drives: 2016 2SS Mosaic Black Join Date: Apr 2010
Location: Arlington Texas
Posts: 854
 |
What are you hoping to gain with this setup?? That tire is pretty wide for that wheel which can affect it's performance.
__________________
Replacement car ordered 2/02/2016
2/03/16 2500 2/04/16 3000 no TPW 2/8/16 3000 TPW 2/29 2/18/16 3400 3/3/16 3800 3/4/16 4B00 3/5/16 4300 3/7/16 4200!!! |
|
|
|
|
09-30-2017, 11:00 AM
|
#5 | |
|
SABIO
Drives: 2016 CAMARO 1SS Join Date: Jul 2015
Location: Bradford, ON
Posts: 5,012
|
Quote:
You would need longer studs and a hub centric spacer. Unless these wheels are dirt cheap. Put that money...and the extra effort into a properly sized set of wheels. I guess you want to rotate? Get a 25mm offset for all 4. It will make the rear push out a little but will still be inside the fender....and look better. 275/35/20 would work well too
__________________
|
|
|
|
|
|
09-30-2017, 12:16 PM
|
#6 |
|
Drives: 2019 Red Hot ZL1 1LE: 2012 RAM 2500 Join Date: Mar 2012
Location: DeRidder, LA
Posts: 711
|
I like the rotate plan, I did it to my 2010 Camaro, if anything I will do the 20X10 +23 for all four corners that way I can get one set of tires that are the same size all at once.
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
