07-01-2017, 11:03 PM | #43 |
^^ just feel around for the door. I just changed mine two days ago
|
|
07-02-2017, 10:44 AM | #44 |
Drives: 2016 Garnet Red 1SS Join Date: Feb 2011
Location: Tucson
Posts: 208
|
|
07-02-2017, 10:54 AM | #45 |
Drives: 2017 Camaro 1SS, 2023 Sierra Join Date: Feb 2014
Location: Cleveland, OH
Posts: 196
|
Your pictures do not show the door, you need to get lower and look upwards above the solid piece with the 2 holes. Look back at the original post with pictures to compare.
|
07-02-2017, 10:55 AM | #46 |
Drives: 2016 Garnet Red 1SS Join Date: Feb 2011
Location: Tucson
Posts: 208
|
|
07-02-2017, 10:56 AM | #47 |
Drives: 2016 Garnet Red 1SS Join Date: Feb 2011
Location: Tucson
Posts: 208
|
|
07-02-2017, 10:56 AM | #48 | |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
Quote:
Look up higher....it's there...... |
|
07-02-2017, 11:07 AM | #49 |
Drives: 2016 Garnet Red 1SS Join Date: Feb 2011
Location: Tucson
Posts: 208
|
Found it! Thanks guys. 20k miles.
|
07-02-2017, 11:10 AM | #50 |
Retired from Car mfrs....
Drives: 2LT RS/HR-V Join Date: May 2013
Location: /Fort Lauderdale
Posts: 10,048
|
Give it a couple mild spritzes of fabreze (non scented) before you slide it back in....
|
07-02-2017, 11:13 AM | #51 |
Drives: 2016 Garnet Red 1SS Join Date: Feb 2011
Location: Tucson
Posts: 208
|
|
09-24-2017, 03:03 PM | #52 |
Drives: 2016 2SS Red Hot Join Date: Dec 2015
Location: Greater Los Angeles
Posts: 176
|
What a pain in the ass this was.. Couldnt get the pegs out. Thought i was about to break the damn thing.
__________________
2SS Red Hot 6 Speed, NPP, MRC, 5 sploke black low-gloss, glow-tie
|
09-29-2017, 02:36 PM | #53 |
davet
Drives: 2016 2SS Mosaic Black Join Date: Apr 2010
Location: Arlington Texas
Posts: 854
|
Glad I found this post. I didn't find anything else on the Internet. No YouTube videos, nothing at all. I haven't been on this forum in quite a while. Should have known the answer would be here.
It is a pain. Fortunately I had a clamp that I got at HF to hold 2x4s together so they don't warp and that was the perfect tool for squeezing the glovebox. Finished and realized I had forgotten to spray with new car or learpther scent. I guess that clamp makes it easy enough to pull it back out.
__________________
Replacement car ordered 2/02/2016
2/03/16 2500 2/04/16 3000 no TPW 2/8/16 3000 TPW 2/29 2/18/16 3400 3/3/16 3800 3/4/16 4B00 3/5/16 4300 3/7/16 4200!!! |
09-29-2017, 03:09 PM | #54 | |
Drives: 2016 Camaro 1LT Join Date: Jan 2016
Location: California
Posts: 3,491
|
Quote:
Sorry, I dont make youtube videos. i find the whole home-style videos on there to be pretentious/narcissistic and I dont have the time to go pro. So forum posts it is. |
|
09-29-2017, 03:28 PM | #55 | |
davet
Drives: 2016 2SS Mosaic Black Join Date: Apr 2010
Location: Arlington Texas
Posts: 854
|
Quote:
Again really appreciate the post. Very helpful.
__________________
Replacement car ordered 2/02/2016
2/03/16 2500 2/04/16 3000 no TPW 2/8/16 3000 TPW 2/29 2/18/16 3400 3/3/16 3800 3/4/16 4B00 3/5/16 4300 3/7/16 4200!!! |
|
10-22-2017, 06:48 AM | #56 |
Drives: 2024 Riverside Blue 2SS 1LE Join Date: Mar 2016
Location: Fort Wayne, IN
Posts: 1,209
|
People are making this harder then it has to be. Empty glove box, on the right side slide clip forward to unhook, use a wonder bar (one inch wide pry bar) and place directly in middle of the left edge of box and put just enough pressure to visibly see the one inch wide "block" clear the lip that holds it in place, keep just enough pressure to keep from falling back in place and do the same on the right side. Once you clear the lip on the right side the box will swing down. There are two clips on the bottom of the filter cover that hold it in place, unclip and pull out cover, change filter and reverse. It took longer to empty the glove box then to change the filter.
|
|
|
Post Reply
|
|
|