[Brianw36]

I am going over my tune and there are a few redundant tables between the ECM and FPCM in a 2016 Camaro SS. Should these tables match each other completely? Including axis information? The tables I'm referencing are ECM 6976 regulation pressure and fscm 6995, and ECM 6975 max desired pressure and fscm 6994. My ECM 6975 axis starts at 0 and ends at 56.0 g/s. My fscm 6994 axis starts at 0 and ends at 48 g/s. and the pressure starts at 560kPa and ends at 586 kPa.

My regulation pressure in ECM 6976 starts at 450 kPa and ends at 586 kPa with axis 0- 56 g/s
fscm 6995 starts at 450 kPa and ends at 586 kPa with axis 0- 48 g/s


Are these tables supposed to match each other in both pressures and axis values? I have an aux fuel pump and I'm wondering if these tables not matching completely could cause issues.