[stratt]

Originally Posted by EMTNLSS

Most people use this paint. http://www.vhtpaint.com/specialty/vht-nite-shades

Thank you! Found a great DIY below. Guy does an amazing tutorial.

http://www.9thgencivic.com/forum/ext...cs/9871?page=1

[2SSRS@Gen5diy]

Originally Posted by Darth Martel

just plain old black spray paint? is it a special type of paint?

Its paint like the one used when painting a black car, but is thinned down so it will cover in 10 coats but you only do 3-5 coats.

Originally Posted by EMTNLSS

Most people use this paint. http://www.vhtpaint.com/specialty/vht-nite-shades

Originally Posted by stratt

Thank you! Found a great DIY below. Guy does an amazing tutorial.

http://www.9thgencivic.com/forum/ext...cs/9871?page=1

tried that before and i never got the same cover from one end to the next.

[tecboy]

Do you have any closeup pics? It looks like the center where the reverse lense is located is not blacked out?

[2SSRS@Gen5diy]

Originally Posted by tecboy

Do you have any closeup pics? It looks like the center where the reverse lense is located is not blacked out?

We did it like the SEMA cars where done, its up to you how you want the lights to look.

[tecboy]

i was trying to decide if i wanted all black or the "SEMA" version...only closeup pics of the sema are with the lights on...i was curious if you had any close up with the lights off...

[2SSRS@Gen5diy]

Originally Posted by tecboy

i was trying to decide if i wanted all black or the "SEMA" version...only closeup pics of the sema are with the lights on...i was curious if you had any close up with the lights off...

All i have is this, not that good but you can see that its clear in the center.

[chris227]

Originally Posted by tecboy

i was trying to decide if i wanted all black or the "SEMA" version...only closeup pics of the sema are with the lights on...i was curious if you had any close up with the lights off...

Here's the copo from behind, lights off.

[tecboy]

The SEMA and COPO versions...it appears that the brake light portion of the clear lense (outer) is tinted but the inner portion (reverse light) has been left clear/stock?

[2SSRS@Gen5diy]

Originally Posted by chris227

Here's the copo from behind, lights off.

Thanks but if i remember wright there the non RS lights same thing for the headlights.

[chris227]

Originally Posted by 2SSRS@Gen5diy

Thanks but if i remember wright there the non RS lights same thing for the headlights.

I believe their is only one blackout tailight being sold and all the pics of the rear with the lights on looks like LED. I may be wrong since I havnt seen a non RS camaro from behind.