No-tune Intake

dgreenberg · 05-21-2018, 08:49 PM

Hello all,

My 2018 ZLE is just about to pass 500 miles! I am wanting to do an intake mostly for the supercharger whine. Power increase would be the cherry on top! As long as I don’t experience any power losses, and do not need to tune I’m all ears!

And also, who offers forum pricing? Go!

Sent from my iPhone using Tapatalk

drfeelgood · 05-21-2018, 08:59 PM

covered multiple times

dgreenberg · 05-21-2018, 10:36 PM

Quote:

Originally Posted by drfeelgood

covered multiple times

Thank you for the very helpful comment sir. I’m sure there are many threads talking about Cold Air Intakes.

I didn’t see any stickied threads and did not feel like scrolling for days. Thought I’d post my own variation of the question.

Sent from my iPhone using Tapatalk

EMTNLSS · 05-21-2018, 10:40 PM

Rotofab seems to be the go to intake. Phastek Performance has it for 10% off this month with code MD18. https://www.phastekperformance.com/2...ld-air-zl1.htm

mdmoore23 · 05-22-2018, 01:24 AM

Rotofab. Don't expect much power, but the fit and finish is top notch. And the whine and intake sounds are increased.

Lethal Z · 05-22-2018, 06:33 AM

Quote:

Originally Posted by dgreenberg

Thank you for the very helpful comment sir. I’m sure there are many threads talking about Cold Air Intakes.

I didn’t see any stickied threads and did not feel like scrolling for days. Thought I’d post my own variation of the question.

Sent from my iPhone using Tapatalk

In a nutshell the general consensus and backed by dyno results is that a CAI makes very little HP improvement and the increased intake sound is also minimal. The majority of guys do this as an improvement in appearance, but at average price of $500-$600, you get very little bang for your buck. You do not need a tune with a CAI, hope that helps.

BlaqWhole · 05-22-2018, 07:55 AM

CAI is a box style intake. So you won't get much whine with that one. RF is an open style and it seems to be the more popular one. Then there's K&N which is pretty decent if not pricey. For now it seems that RF is the best choice.

DragRacerX · 05-22-2018, 08:30 AM

I am awaiting my CAI by aFe (Momentum GT Pro 5R Cold Air Intake for 2017 6.2L ZL1 Camaro 54-74214), It was on backorder. Should be here tomorrow. I caught it on sale for $429 shipped from LSXceleration.com; but now they're selling it for $474. Will post my opinions after I install it.

Can'tHave2MuchHP · 05-22-2018, 11:54 AM

I run a Roto-fab. Installation was perfect. It looks like a project if you've never done them before but the directions are incredibly accurate and well planned. I wouldn't buy a ZL1 intake from anyone else. IMO the Cold air Inductions setup looks just as choked as a factory box, might as well cut the bottom of the box like EDFHOBBIES showed. The K&N Carbon one is sweet too but I can't bring myself to put an Auto Zone intake on my ZL1.

ICTsccaCamaro · 05-22-2018, 12:07 PM

You can also remove the sound damper from the lid of the supercharger for a little more noise for free.

VAZL1 · 05-22-2018, 05:19 PM

Quote:

Originally Posted by DragRacerX

I am awaiting my CAI by aFe (Momentum GT Pro 5R Cold Air Intake for 2017 6.2L ZL1 Camaro 54-74214), It was on backorder. Should be here tomorrow. I caught it on sale for $429 shipped from LSXceleration.com; but now they're selling it for $474. Will post my opinions after I install it.

Been there done that and love mine

Lowflight · 05-22-2018, 05:42 PM

I used the money to do more expel and have a better paint correction done. Did not see much of anything in terms of value in an intake.

dgreenberg · 05-22-2018, 11:26 PM

Quote:

Originally Posted by ICTsccaCamaro

You can also remove the sound damper from the lid of the supercharger for a little more noise for free.

Is that the similar to the foam insulation square that is found underneath the inside the stock intake box lid?

Sent from my iPhone using Tapatalk

Markoz28 · 05-23-2018, 08:41 AM

I have the Rotofab on my 2018 ZL1. Looks great for the shows, sounds great during the drive, and if I make anywhere near 10hp it’s a plus.

Will it help you win more races? Maybe not. But at any rate it’s still pretty cool.

05-21-2018, 08:49 PM	#1
dgreenberg Drives: ‘14 Z/28 #352, ‘16 ACR, Join Date: Mar 2013 Location: CA & ID Posts: 515	No-tune Intake Hello all, My 2018 ZLE is just about to pass 500 miles! I am wanting to do an intake mostly for the supercharger whine. Power increase would be the cherry on top! As long as I don’t experience any power losses, and do not need to tune I’m all ears! And also, who offers forum pricing? Go! Sent from my iPhone using Tapatalk

05-21-2018, 08:59 PM	#2
drfeelgood Drives: 2017 ZL1 Convertible A10 Join Date: Aug 2017 Location: San Gabriel, CA Posts: 992	covered multiple times __________________ '17 White ZL1 A10 Convertible - TM ported TB - RotoFab CAI - 2.3" griptech upper pulley - Kooks 1 7/8" Headers with High Flow Cats - Borla S-type Catback - Audio Overhaul - NavTV M650-GM - 20" BlackDiForza- Michelin Pilot Sport4S - Tuned at BRC Raceworks (606rwhp/675trq) '14 CTS-V Coupe - ZL1 lid - Ported TB - Ported Snout - AirRad CAI - 8.66" lower - 2.55" upper- Greenbelt - SW Headers - SW Catback - Varimax Intercooler Pump - Track Attack Intercooler-Tuned at BRC Raceworks (551rwhp/516trq) '17 Maserati Levante- STOCK

05-21-2018, 10:40 PM	#4
EMTNLSS Drives: 2016 Hyper Blue 2SS Join Date: Feb 2016 Location: Layton, UT Posts: 498	Rotofab seems to be the go to intake. Phastek Performance has it for 10% off this month with code MD18. https://www.phastekperformance.com/2...ld-air-zl1.htm __________________ 2SS Hyper Blue Metallic \| A8 \| Jet Black Interior \| NPP Exhaust Current Mods: Catch Can \| aFe Lowering Springs \| GM 2nd Gen Splitter \| Hotchkis Sway Bars \| MRR FS02 Wheels \| Flowmaster Exhaust \| Dark Tail Lights \| Diode Dynamics Sidemarkers \| Roto Fab \| Solar TB \| PRAY Ported IM \| BMR \| TSP 1 7/8" Catted Headers \| PRAY Tune Upcoming Mods:

05-22-2018, 08:30 AM	#8
DragRacerX Drives: 2017 ZL1 A10 HBM & 2012 2SS M6 IBM Join Date: Jul 2009 Location: Dallas, GA Posts: 267 View My Garage	I am awaiting my CAI by aFe (Momentum GT Pro 5R Cold Air Intake for 2017 6.2L ZL1 Camaro 54-74214), It was on backorder. Should be here tomorrow. I caught it on sale for $429 shipped from LSXceleration.com; but now they're selling it for $474. Will post my opinions after I install it. __________________ 2017 ZL1 Hyper Blue Metallic, A10 Trans, CF Hood, NAV, PDR, Sunroof, aFe Momentum GT CAI, Vmax Motorsports TB, ARH LT CAV8-16200300FSQWC (Daily Driver) 576 RWHP/575 RWTQ 2012 2SS/RS IBM Technostalgia LED taillights, Magnuson TVS2300 & 3.40 Pulley, Vengeance Racing VRPD-2 Cam Kit, ZL1 Fuel Pump, Injector Dynamics ID850 Injectors, Forced Induction Interchiller, Cold Air Inductions CAI, BBK 40210 LT Headers & Free Flow Cats, MBRP S7022409 T409-Stainless Steel 3" Dual Cat Back Exhaust System, Lingenfelter ZR1 Dual Disc Clutch Kit, ZL1 Brake Kit Rotors & Calipers 628 RWHP/596 RWTQ / A.C.E.5

05-22-2018, 12:07 PM	#10
ICTsccaCamaro ITCRNRS Drives: 2018 ZL1 1LE Join Date: Jun 2012 Location: Wichita KS Posts: 1,575	You can also remove the sound damper from the lid of the supercharger for a little more noise for free. __________________ 2018 ZL1 1LE Ordered 6/29/17 Built 11/6/17 Delivered 12/7/17, Summit White, PDR, NAV, https://www.youtube.com/c/tylerpotter SOLD: 2014 Summit White 1LE 2SS/RS, Recaros, NPP, NAV, KONI Yellow's SOLD: 2012 Black 2LT/RS, Fully 1LE swapped, Brembo swap

05-22-2018, 01:24 AM	#5
mdmoore23 Drives: 2017 ZL1 Join Date: Jun 2012 Location: Graniteville,SC Posts: 645	Rotofab. Don't expect much power, but the fit and finish is top notch. And the whine and intake sounds are increased.

05-22-2018, 07:55 AM	#7
BlaqWhole Account Suspended Drives: 2017 Camaro ZL1 A10 Join Date: May 2012 Location: NJ Posts: 7,692	CAI is a box style intake. So you won't get much whine with that one. RF is an open style and it seems to be the more popular one. Then there's K&N which is pretty decent if not pricey. For now it seems that RF is the best choice.

05-22-2018, 11:54 AM	#9
Can'tHave2MuchHP Drives: Fast Join Date: Mar 2015 Location: Michigan Posts: 3,696	I run a Roto-fab. Installation was perfect. It looks like a project if you've never done them before but the directions are incredibly accurate and well planned. I wouldn't buy a ZL1 intake from anyone else. IMO the Cold air Inductions setup looks just as choked as a factory box, might as well cut the bottom of the box like EDFHOBBIES showed. The K&N Carbon one is sweet too but I can't bring myself to put an Auto Zone intake on my ZL1.

05-22-2018, 05:42 PM	#12
Lowflight Drives: 2018 ZL1 Join Date: Jan 2017 Location: Equal Time Point (Mississippi) Posts: 156	I used the money to do more expel and have a better paint correction done. Did not see much of anything in terms of value in an intake. __________________ “The Universe Is Not Required To Be In Perfect Harmony With Human Ambition”- Carl Sagan 2018 Chevrolet Camaro ZL-1 Red FOR SALE. See My FS Thread

05-23-2018, 08:41 AM	#14
Markoz28 Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018 Location: RGV Texas Posts: 1,527	I have the Rotofab on my 2018 ZL1. Looks great for the shows, sounds great during the drive, and if I make anywhere near 10hp it’s a plus. Will it help you win more races? Maybe not. But at any rate it’s still pretty cool.

User Name		Remember Me?
Password