[Nate...]

Originally Posted by Evil-Bee-NH

Installed everything at once but I know from experience what the throttle controller difference feels like when at SP0 it's at stock acceleration I used that when I picked up the car so I could feel the mod differences and they are very noticeable then with the throttle controller it's instant power and you can still tell it's no longer stock.

That makes sense. It's cool that you can set it to 0 like that so that the differences are noticeable.

[Evil-Bee-NH]

Originally Posted by Nate...

That makes sense. It's cool that you can set it to 0 like that so that the differences are noticeable.

TY, hows the Pedalmax treating you I haven't read into it much I know it does wonders like the VTC. Still looking for a good exhaust may just get one custom done.

[motorhead]

Do you have any pics under the hood? I haven't seen any of those yet.

[Evil-Bee-NH]

Originally Posted by rorymick

That's awesome! Impatiently waiting for you to get it on a dyno and hopefully a tune!

The stock tune apparently "down tunes" back to the pre set output figures regardless of mods. From what I've read. But if your showing performance gains then that just may not be true!

Post up some vids of the sound of the intake if you get a chance please.

So this does happen but only in higher gears. Possibly to save the engine and other things not sure the real reason but I do plan to tune it this spring my tuner and dyno guy is working up some comparison charts for me right now from my stock and aftermarket runs he thinks they are interesting to say the least.

[rickwelch69]

what do you have going on in the plate area in the rear, can't tell in the pic but looks cool.

Originally Posted by Evil-Bee-NH

EVILBEE 1.0 Was officially traded in on June 27th no more push bar for those pesky deer...

EVILBEE 2.0

2017 Chevrolet Camaro I4
8-Speed Automatic
Nightfall Gray Metallic
Sunroof
Black Interior Trim
20" Black Low-Gloss Wheels

June 27th 2016

EVILBEE 2.0 At Work 1 Hour Under My Possession. Dealership didn't recon going to rename then snailership with how bad the process was.





July 8th 2016

EVILBEE 2.0 is finally detailed and the plate mod is complete. Still waiting for a decent CAI before I start getting really heavy with the mods. Sto-N-Sho Front Plate & Classic Industries Rear Grille Plate Holder (Had to Dremel a slot out of it the backup camera doesn't allow for clearance otherwise).





August 5th 2016

EVILBEE 2.0 added RPI Stealth Splash Guards and Novistretch Bra (Pics Rear, Front Splash Guards & Bra Pictures in that order. Install was very easy aside from waiting on RPI Designs to send me the appropriate screws which they did for free and sent the right ones.







September 10th 2016

Added Flowmaster American Thunder Axle-Back no real look difference aside from no more giant suitcase. Sound is a lot louder but deeper with the CAI and Hi-Flo Downpipe then the stock videos from Flowmaster have a few vids up in the I4 Section. Some like it some don't I found it strange at first but it's toned down after the last 3k miles and sounds much more refined and sounds great at stop lights.

[Evil-Bee-NH]

Originally Posted by rickwelch69

what do you have going on in the plate area in the rear, can't tell in the pic but looks cool.

Classic Industries Grille Plate for the 5th Gen. I had to dremel out the backup camera section so keep that in mind if your interested.

[Evil-Bee-NH]

Added some EVILBEE 1.0 pics and small track info on post 2 nothing major still need to get underhood pics.

[Evil-Bee-NH]

Nothing new to note finally got the harness for the light bar hooked up just waiting on some good weather to hit... Cold up here in New England guess I should be thankful father winter has kept the snow south of me so far.

[Evil-Bee-NH]

Updated Post #3 with Stock & Aftermarket Dyno Pulls. Done on the same dyno at the same location with similar weather conditions.

[Evil-Bee-NH]

Updated my build list with current mods on my car added a few on order items that i'm impatiently awaiting. Also going to work on my own custom rear seat delete but weather is an issue to progress in new England this time of year.

[Corner carver]

Gotta ask... What is the 'squirrel killer'?

[Evil-Bee-NH]

Originally Posted by Corner carver

Gotta ask... What is the 'squirrel killer'?

That'll be revealed when I install it. I'm chomping at the bit for my dyno tune date. Also have a few goodies in transit this week. 72mm Throttle Body w/Charge Pipe from JacFab. Getting him numbers before and after tune as i'm for the most part using full bolt-ons for the I4. I really hope it works wonders for both him and myself. I'll be getting some newbie track runs in at New England Dragway before the tune and after.

[Evil-Bee-NH]

So going to pick-up all my remaining project parts and hopefully getting everything installed within the next week before my tune on Saturday. Damn snow is killing me.

[Michigan1LTRS]