![]() |
#1 |
![]() Drives: camaro Join Date: Sep 2021
Location: az
Posts: 7
|
mask
hi gang is the novistretch front bumper mask worth it . mostly for highway travels, wondering if it keeps the rocks from chipping? thanks
|
![]() |
![]() |
![]() |
#2 |
![]() Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 586
|
I have one, seems to work fine for me.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
![]() |
![]() |
![]() |
#3 |
![]() Drives: 2019 ZL1 Crush Join Date: Jan 2019
Location: Colorado Springs
Posts: 534
|
The cars I have seen with it look like the paint gets rubbed/scratched. PPF is king
__________________
2019 Crush A10
E-Force 2650 670WHP 615WTQ All besides the 2650 is bone stock down to the air filter. |
![]() |
![]() |
![]() |
#4 |
![]() ![]() |
I would never ever use one. 1) That look went out in the 1980s. 2) Anything that can flap against your paint in the wind cannot be good for it. JMHO
__________________
On the Korn
Kong Stage X Port, LPE Big Bore HPFP, Big Gulp, NW103, XDI +30 Injectors, ARH Coated Headers, dual X-pipes, MBRP resonators, AWE Touring, FlexFuel, JMS Booster, Elite E2-X CC and ADMv2 Reservoir. Stock motor, stock heads/cam, stock pulleys 714/661 SAE |
![]() |
![]() |
![]() |
#5 |
![]() Drives: 2018 2SS 1LE Black Join Date: Aug 2018
Location: Cape Cod
Posts: 562
|
I have one (black car) and I have suffered zero paint damage 32K miles, I only use it in the winter and spring when the roads are sanded. Of course taking it off when washing the car and tossing it into the washer probably helps. That said it makes me feel better and does seem to help somewhat. $1200 to cover a grill and splitter that I can replace for almost as much didn't make sense. I have more paint damage on the rear quarters than the front end. It's a Chevy not a collectors car.
|
![]() |
![]() |
![]() |
#6 |
![]() Drives: 2020 ZL1 A10 Join Date: Feb 2020
Location: East TN
Posts: 418
|
PPF or chips/scratches. End of story
|
![]() |
![]() |
![]() |
#7 |
![]() ![]() ![]() ![]() ![]() ![]() |
Used one on my SS. Worked ok, but around the headlights I still got all sorts of crap caked on.
__________________
![]() 2017 ZL1 A10 2017 2SS M6: (SOLD) || 2014 2LT Convertible: (SOLD) || 2010 2LT M6 Supercharged:(SOLD) || 1987 IROC-Z 5.0 M5: (SOLD) |
![]() |
![]() |
![]() |
#8 |
Petro-sexual
Drives: Ultra-Grin Join Date: Oct 2006
Location: Crapramento, Crapifornia
Posts: 14,291
|
I used this mask and it rubbed through the paint on the grille, down to the plastic. It also rubbed and dull'd every edge that it was contacting, like the upper edges of the top of the splitter. I kept it nice and clean all the time. I didn't even spend half my time doing freeway driving with it. It rubbed through in less than 2000-miles of use. It was nice protection for what it covered except for these instances. It's great for rock chips but totally farked for everything else. I should've just got PPF first, which is what I'd recommend anyone else. I hoped everyone else was wrong, and no one really commented on long-time use (that I noticed) with this bra, so I went with it first. I was wrong, as implied by everyone else pushing PPF.
AND - any bras cover what I think is ZL1's best angle - it's face.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R / HHP TCM / PLM Heat Exchanger / ZLE Cradle bushings / BMR Chassis-Suspension Stuff / aFe bars / 17" Drag Pack / Diode Dynamics LEDs / ACS Composites Guards / CF Dash / tint / other stuffs |
![]() |
![]() |
|
|
Post Reply
|
Thread Tools | |
|
|