You are browsing camaro6 
09-09-2019, 05:46 PM
|
#1 | |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Ls Fest Best pass was 9.41@146 Low IAT's, Video
So I went to the LS Fest and had a great time. Made some wicked passes with the new 2650 and one thing that really stands out to me was the IAT's prior to the burn out and then down at the big. So besides really good passes and anyone who was there knows the staging lane lines were very long. Starting and stopping constantly and after logging my passes from a couple minutes before the burn out so I could monitor data while idling and during the pass and outside temps were mid 80's and up, Da was usually about 2500 plus. My beginning IATs were at about 135 just before the burn out till and at the big end after the traps which were about 110 and thats running about 15 lbs of boost all thru the run. I'm spraying very little meth/water at this point since its not needed because of the low temps. I may need to turn it up because of my fueling issues as I saw the low side pressures drop a little more then I like. I'll work on that this winter and probably even go with an ice box to lower temps even more. These big intercooler really do the job for sure, I had higher intake temps with the 2300 and they had pretty good intercoolers and I push this car hard just like I always have. No mercy.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 Last edited by laynlo15; 09-12-2019 at 02:02 PM. |
|
|
|
|
09-09-2019, 10:24 PM
|
#2 |
|
2016 loaded 2SS
Drives: Maverick X3 Turbo R Join Date: Feb 2015
Location: United States
Posts: 242
|
That's awesome. do you have any videos?!
__________________
|
|
|
|
|
09-10-2019, 08:37 AM
|
#3 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Yes I do, just have to get them uploaded and I'll do that today. I have in car and full passes out of the car.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
09-10-2019, 09:05 PM
|
#4 |
|
ROTN APL
Drives: 2017 red hot ss Join Date: Jun 2017
Location: south texas
Posts: 78
|
I am very interested in the ice box. Keep up updated on that.
|
|
|
|
|
09-10-2019, 10:07 PM
|
#5 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I'll keep you up todate
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
09-11-2019, 03:27 AM
|
#6 |
 
Drives: 2016 2SS nav mag ride npp a8 Join Date: Jul 2013
Location: St Louis
Posts: 202
|
Congrats on your time. You really got a handle on it.
__________________
2016 2SS A8 mag ride npp exhaust nav sunroof Rotofab CAI Borla Atak NPP Corsa X pipe BBS CHR Extreme Contactsport
2.9 Whipple Elite catch can Rotofab Juiced Motorsports installed by STG Motorsports JMS Fuel Maxx tuned by Gregs Tuning Operation Weld Laguna 17x10 18x5 2006 mustang gt Magnuson Livernois stage 2 heads stage 2 blower cams dynatech headers 4.10's Circle D convertor 533/511bs) (9.8lbs) |
|
|
|
|
09-11-2019, 07:03 AM
|
#7 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Getting there, got a big grudge race this weekend with a guy named Herman, he has Demon and a YouTube channel called Demonology. Its a Mopar event at Gateway but was invited by Phil who is the promoter and I met him at Sema. Gonna make the trip and see how the race turns out. We did a pod cast on you tube last night and it was pretty cool.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
09-11-2019, 09:45 PM
|
#8 | |
   
Drives: 2017 Camaro 2SS Nightfall Gray vert Join Date: Jan 2018
Location: Swansea, IL
Posts: 1,219
|
Quote:
__________________
2017 Camaro 2SS vert - Nightfall Gray
Magnuson Heartbeat SC - Tuned by JRE Racing 776whp/745wtq (12psi) 2018 Corvette Z06 vert- Black To be tuned by JRE Racing TBD performance |
|
|
|
|
|
09-12-2019, 06:59 AM
|
#9 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Cool, some day we will make that happen. I looked back at my first log on Saturday morning and my IAT's didn't get over 120 degrees and dropped to about 112 at the end of the pass. I'd say those are pretty stellar numbers for the outside temps we were seeing.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
09-12-2019, 11:21 AM
|
#10 | |
|
Petro-sexual
|
Quote:
__________________
 '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
|
09-12-2019, 12:59 PM
|
#11 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Yep, if my pulley gets here we will adding a couple more lbs of boost. Might put me right at the end of my fueling for sure. I'll just turn up the Meth/water or add the second line to the other nozzle.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
09-12-2019, 01:59 PM
|
#12 | |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
|
09-12-2019, 02:34 PM
|
#13 |
|
Petro-sexual
|
Damn! Looks like you were hit from the back by a freight train, HAHAHA! NICE!!!
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|
09-12-2019, 03:24 PM
|
#14 |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
He ran 10.03@131 and he got out on me a little but went by him about 660 ft. and 15 mph faster thru the traps. That Camaro probably on weighs 2800 lb with driver and I'm 3890 with me in it.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
|
|
|
|
Post Reply
|
| Thread Tools | |
|
|
