02-19-2018, 06:44 PM | #1 |
Drives: 2001 Audi TT, 2016 Camaro Join Date: May 2016
Location: Eastern Washington
Posts: 833
|
Thermal Reduction Plates: Sold
I have a set of Fasterproms thermal reduction plates that are unused. These spacers act as a insulator between the supercharger and cylinder heads and should reduce your LT4 supercharger heat soak, resulting in lower IATs. I'm making my own for my E-Force supercharger, so I don't need this set.
$300 With bolts and PVC spacer included. Last edited by Atomic Ed; 05-16-2019 at 02:18 PM. |
05-15-2019, 01:49 PM | #2 |
Drives: 2017 zl1 camaro Join Date: Feb 2019
Location: Florida
Posts: 51
|
Sent pm.
__________________
9.52@143 first bolt on only car to reach 9.50s. First zl1 in the 9s on stock unported blower. Sbe LME heads gptuning cam typical mods jokerz prototype port blower 9.30@150 best so far work in progress. 4.70 60-130 at 3800da now in Tennessee.
|
05-16-2019, 02:18 PM | #3 |
Drives: 2001 Audi TT, 2016 Camaro Join Date: May 2016
Location: Eastern Washington
Posts: 833
|
Sorry, sold.
|
05-17-2019, 07:53 AM | #4 |
Drives: 2017 ZL1 Join Date: Jun 2018
Location: Randolph
Posts: 317
|
I’ll have a set available next week when my whipple is installed
__________________
Kooks full exhaust, Roto Fab, Whipple,Williams 103, Fore innovation, JRE cam and tuning
|
|
|
Post Reply
|
|
|