04-08-2021, 08:21 PM | #1 |
Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
LT2 intake manifold - 90° fitting
Finally found an off the shelf 90° fitting for LT2 intake manifold. This is good if you don’t want your hose shooting towards the hood. Also will probably help to keep from hitting the insulation on the hood too. Barb is sized and should work fine for 3/8” hose. Bundy fitting is 10mm.
https://www.amazon.com/Dorman-800-17.../dp/B00CI6FBYE
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ |
01-31-2022, 09:37 PM | #2 |
Drives: 2017 1ss 1le Join Date: Sep 2015
Location: new york
Posts: 436
|
Thanks for this! It’s a big help!!!
|
02-01-2022, 04:14 PM | #3 |
Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
No problem and you’re welcome.
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ |
|
|
Post Reply
|
Thread Tools | |
|
|