[saltine1130]

Originally Posted by BlackbeastSS2

Yes, very slight. Near the area of the front middle, just before throttle body. You can see a slight indentation on heat blanket/cover on the inside of hood.

how does the cover look with any sort of engine vibration? and scuffs?

[sr71bb]

Originally Posted by BlackbeastSS2

I just peeled them off and added vinyl wrap for an insert for now. I just didn’t want to leave the Corvette logo on the manifold on a Camaro. I used a heat gun to remove it.

SO basically these CORVETTE Lettered stainless badges are basically GLUED on to the top of the manifold???

[BlackbeastSS2]

Originally Posted by sr71bb

SO basically these CORVETTE Lettered stainless badges are basically GLUED on to the top of the manifold???

That's correct, just use a heat gun to peel them off.

[sr71bb]

Originally Posted by BlackbeastSS2

That's correct, just use a heat gun to peel them off.

THANKS!! I think what I will do is REMOVE the corvette insert and have some OTHER inserts custom made via a waterjet machine to go into the insert cavity.

Actually after looking at the parts breakdown on the manifold it looks like you have to order the emblems separately anyway. What quantity of the spacers and cover bolts do you need????

https://www.gmpartscorp.com/a/Chevro...CF20680.html#1

[Trochoidal]

Originally Posted by sr71bb

What quantity of the spacers and cover bolts do you need????

6 each
1 at the back
1 at the front
2 on each side

[sr71bb]

Originally Posted by Trochoidal

6 each
1 at the back
1 at the front
2 on each side

Thanks for the reply. What about these Engine Cover SPACERS they are listing separately with the manifold (part listed as 3. in the link below). How many of those do you need???

https://www.gmpartscorp.com/a/Chevro...CF20680.html#1

[Trochoidal]

That picture was misleading and I took it long ago and I was wrong. There isn’t a bolt on the back and there are 4 spacers (2 on each side).

[sr71bb]

Originally Posted by Trochoidal

That picture was misleading and I took it long ago and I was wrong. There isn’t a bolt on the back and there are 4 spacers (2 on each side).

Ok then, 5 total bolts and 5 spacers. THANKS!!!