05-04-2014, 10:42 AM | #337 | |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
Quote:
|
|
05-04-2014, 02:04 PM | #338 |
Drives: 2013 IOM ZL1 Join Date: Nov 2009
Location: Manteca CA
Posts: 683
|
Mine came with the long screws also. The correct length for the bottom two screws is 10mm. I bought some black oxide socket head cap screws. The black screws look much better. I also used a straight fitting coming off of the center port for the outlet.
|
05-04-2014, 06:02 PM | #339 |
Drives: 20 1LE 2SS M6 Rally Green Join Date: Mar 2014
Location: Franklin WI
Posts: 6,632
|
I saw someone else recommend Ninja Black Thread Tape for a clean, no white, install. I did that with great result
__________________
"the trouble with our liberal friends is not that they're ignorant; it's just that they know so much that isn't so.” Ronald Reagan - |
05-05-2014, 12:43 PM | #340 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
|
05-08-2014, 06:29 PM | #341 |
THERAPY
|
isn't there an install video somewhere?
Planning on putting mine on Sat. |
05-09-2014, 11:53 AM | #342 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
|
05-09-2014, 12:06 PM | #343 |
Just installed mine about 2 weeks ago. The instructions are very easy to follow and guide you through everything. Loving the can so far great product.
|
|
05-09-2014, 12:47 PM | #344 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
|
05-09-2014, 04:49 PM | #345 | |
Drives: 2013 Camaro ZL1 (IOM) Join Date: Oct 2012
Location: Sun Prairie, WI
Posts: 100
|
It is a very simple install. You should be fine with the online instructions.
Quote:
|
|
05-09-2014, 07:35 PM | #346 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
|
05-10-2014, 11:31 AM | #347 |
THERAPY
|
Is it necessary to install the little clamps around the braided hoses at the end point where they connect to the "nipples". Seems like the hoses fit pretty snug
|
05-10-2014, 12:17 PM | #348 |
Drives: 2000 Camaro SS Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
|
No. The clamps are mostly just a warm and fuzzy thing. People would panic if they were not included.
|
05-13-2014, 01:01 PM | #349 |
Drives: 2012 ZL 1 #370 Join Date: Dec 2010
Location: Switzerland
Posts: 351
|
I install my catch can today. My question. Nobody have fear, then the catch can, falls possibly down. For me, looks this very dangerous. You guys take also loctite for the radiator bolt or not?
I think, i need to make my hoses shorter. My looks longer, then all this pictures. And you guys have installed the clamps on the in and outlet "nipples" on the engine side or not |
05-13-2014, 02:25 PM | #350 |
Drives: 13 ZL1 Vert M6 Join Date: Feb 2014
Location: Romeo MI
Posts: 8
|
I did also wonder about to go over the flanges on the engine,seems as though hose I.D. too small to make it go over them.Also my can has only 2 bolts holding it onto bracket,Production change?
|
|
|
|
|