Aem wideband install question

Evansa22 · 07-17-2021, 10:11 AM

Just trying to figure out where to run the sensor wire thru the firewall. I've read there's a block off plate on the ss, I'd assume its the same on the zl1? Or there's the rubber boot where the main positive cable goes in. Thats all I see, any info and experience is appreciated

20Bluezl1 · 07-17-2021, 11:26 AM

If you look for the thread I have started I wrote up how I did it . I used the sound tube plate and drilled a hole and grommet. You have to depin the AEM connector to pass the wires thru the grommet.

Evansa22 · 07-17-2021, 12:06 PM

Awesome, I actually already have those grommets for the jms wires in the trunk so that works perfect. Thanks!
Wasn't able to find your thread for some reason

CW3SF · 07-17-2021, 12:19 PM

I did same as above. Nice pics

Flowtie1 · 07-17-2021, 12:32 PM

I did the same

Evansa22 · 08-03-2021, 01:13 PM

Thanks guys, worked perfect

Choda · 08-03-2021, 08:27 PM

i have a ton of crap going into that hole and ended up opening it up a bit to fit various plugs through. I use black gorilla tape to cover it. No one notices lol

07-17-2021, 10:11 AM	#1
Evansa22 Drives: HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 808	Aem wideband install question Just trying to figure out where to run the sensor wire thru the firewall. I've read there's a block off plate on the ss, I'd assume its the same on the zl1? Or there's the rubber boot where the main positive cable goes in. Thats all I see, any info and experience is appreciated

07-17-2021, 11:26 AM	#2
20Bluezl1 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020 Location: NJ Posts: 1,232	If you look for the thread I have started I wrote up how I did it . I used the sound tube plate and drilled a hole and grommet. You have to depin the AEM connector to pass the wires thru the grommet. Attached Images Last edited by 20Bluezl1; 07-17-2021 at 11:40 AM.

07-17-2021, 12:19 PM	#4
CW3SF Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019 Location: Sea level Posts: 1,254 View My Garage	I did same as above. Nice pics __________________ Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50

07-17-2021, 12:32 PM	#5
Flowtie1 Drives: 2017 ZL1 Join Date: Apr 2020 Location: South florida Posts: 332	I did the same __________________ 2017 ZL1 M6 Silver Ice Metallic

08-03-2021, 01:13 PM	#6
Evansa22 Drives: HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 808	Thanks guys, worked perfect Attached Images

07-17-2021, 12:06 PM	#3
Evansa22 Drives: HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 808	Awesome, I actually already have those grommets for the jms wires in the trunk so that works perfect. Thanks! Wasn't able to find your thread for some reason

08-03-2021, 08:27 PM	#7
Choda Drives: Turbo 6.2 Join Date: Feb 2019 Location: Buffalo Posts: 702	i have a ton of crap going into that hole and ended up opening it up a bit to fit various plugs through. I use black gorilla tape to cover it. No one notices lol __________________ 2016 Turbo Camaro SS - 800hp/900tq 9.7@146 2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100

User Name		Remember Me?
Password