Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Wheels | Tires -- Sponsored by The Tire Rack


Phastek Performance


Post Reply
 
Thread Tools
Old 10-20-2016, 06:35 PM   #1
streetyme
 
streetyme's Avatar
 
Drives: 2016 2SS nav mag ride npp a8
Join Date: Jul 2013
Location: St Louis
Posts: 202
will a 305 35 20 throw off the computer?

Hello I had 305 35 20 and 275 45 20 on my 5th gen Camaro and was wandering if I could run them on then 6th gen or would it set off the computer? Thanks
__________________
2016 2SS A8 mag ride npp exhaust nav sunroof Rotofab CAI Borla Atak NPP Corsa X pipe BBS CHR Extreme Contactsport
2.9 Whipple Elite catch can Rotofab Juiced Motorsports installed by STG Motorsports JMS Fuel Maxx
tuned by Gregs Tuning Operation
Weld Laguna 17x10 18x5


2006 mustang gt Magnuson Livernois stage 2 heads stage 2 blower cams dynatech headers 4.10's Circle D convertor 533/511bs) (9.8lbs)
streetyme is offline   Reply With Quote
Old 10-20-2016, 08:42 PM   #2
LibertyHill

 
LibertyHill's Avatar
 
Drives: 16 2SS 6MT NPP MRC / 15 K1300S
Join Date: Mar 2016
Location: NW of Austin
Posts: 1,034
No problems here but check clearances. Inside rear drivers side is a harness bulge front. 45s in front? I run 35s F/R.
__________________

Rohana RFX-5 10/11, M/T 275/305, Eibachs, Hellwigs, Hurst SS, DMS LT4 SC 596HP/589TQ, DMS Low-side, Kooks 2LTs, MBRP Race, Rotofab, MMS CC
LibertyHill is offline   Reply With Quote
Old 10-20-2016, 09:47 PM   #3
TommyDuncan
 
Drives: 2016 SS2
Join Date: Oct 2016
Location: Las Vegas NV
Posts: 88
There is a you-tube video that shows how to move the harness in the driver's side rear. It looks really simple. I am doing it tomorrow morning because my tires are HERE! If i have time i will take some pics and maybe do a writeup.
Bybcous... I think, is running 305-35-20 and 285-35-20 with zero issues on aftermarket wheels. That's what I ordered so I will know tomorrow.
TommyDuncan is offline   Reply With Quote
Old 10-21-2016, 07:29 PM   #4
aka Reckless
 
aka Reckless's Avatar
 
Drives: 2016 2SS Camaro
Join Date: Sep 2016
Location: Cumming, GA
Posts: 541
Just got mine on today. No rubbing yet. 305/35-20 in rear on 20x11 wheels. At 65 mph you will be off on your speedo by about 2mph. You will actually read 2mph higher than actual at 65 according to an online calculator. If you have a Garmin GPS that shows your speed you can verify this.
aka Reckless is offline   Reply With Quote
Old 10-21-2016, 08:39 PM   #5
sub_ETCS_ret

 
sub_ETCS_ret's Avatar
 
Drives: 2019 Dodge Challenger Scat Pack
Join Date: Jun 2016
Location: WA
Posts: 1,390
Quote:
Originally Posted by 2SS_in_GA View Post
Just got mine on today. No rubbing yet. 305/35-20 in rear on 20x11 wheels. At 65 mph you will be off on your speedo by about 2mph. You will actually read 2mph higher than actual at 65 according to an online calculator. If you have a Garmin GPS that shows your speed you can verify this.
What is your wheel and tire setup?

Sent from my SM-G920V using Tapatalk
__________________
"Submariners are a bunch of intelligent misfits that somehow seem to get along, understand each other and work well together." - overheard from a surface officer explaining to another sailor about Submariners
sub_ETCS_ret is offline   Reply With Quote
Old 10-21-2016, 09:27 PM   #6
TommyDuncan
 
Drives: 2016 SS2
Join Date: Oct 2016
Location: Las Vegas NV
Posts: 88
I just installed mine today too!

20" Front Size: 20x10.0 with 28mm 285-35 | Rear Size: 20x11.0 with 43mm 305-35

I moved the harness in the rear and no rubbing
I needed a spacer in the front
TommyDuncan is offline   Reply With Quote
Old 10-22-2016, 02:09 PM   #7
Garys16SS
 
Garys16SS's Avatar
 
Drives: 2016 SS, BLACK, MANUAL
Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
Quote:
Originally Posted by TommyDuncan View Post
I just installed mine today too!

20" Front Size: 20x10.0 with 28mm 285-35 | Rear Size: 20x11.0 with 43mm 305-35

I moved the harness in the rear and no rubbing
I needed a spacer in the front
Is your car lowered?? What thickness for you spacer??
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come.
2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller.
2003 SSR red,
2016 Vette
Garys16SS is offline   Reply With Quote
Old 10-22-2016, 03:00 PM   #8
TommyDuncan
 
Drives: 2016 SS2
Join Date: Oct 2016
Location: Las Vegas NV
Posts: 88
Quote:
Originally Posted by Garys16SS View Post
Is your car lowered?? What thickness for you spacer??
Not lowered...yet.

Appears to be a 1/4" spacer. The tire store did it when I wasn't there. The guy has a 5th gen so I told him to drive it around. He said it wouldn't go without the spacer, like the brakes were on.
Not sure if I could go with a thinner one. I can't get my fingers between the tire/strut.
TommyDuncan is offline   Reply With Quote
Old 10-22-2016, 04:34 PM   #9
aka Reckless
 
aka Reckless's Avatar
 
Drives: 2016 2SS Camaro
Join Date: Sep 2016
Location: Cumming, GA
Posts: 541
Quote:
Originally Posted by sub_ETCS_ret View Post
What is your wheel and tire setup?

Sent from my SM-G920V using Tapatalk
MRR 228s

20x10 fronts
BFG Comp 2 285/35-20

20x11 rears
BFG Comp 2 305/35-20

Basically stock tire sizes from 2014 ZL1 (Tire Rack)
aka Reckless is offline   Reply With Quote
Old 10-24-2016, 08:43 AM   #10
Turbo8u
Motorhead
 
Drives: 2016 Camaro Convertible 2SS
Join Date: Jun 2016
Location: Lawrenceville, GA
Posts: 69
Quote:
Originally Posted by 2SS_in_GA View Post
MRR 228s

20x10 fronts
BFG Comp 2 285/35-20

20x11 rears
BFG Comp 2 305/35-20

Basically stock tire sizes from 2014 ZL1 (Tire Rack)

So do we have to run spacers with the 228's. Mine are ordered and I was planning on running 275/35 front and 305/35 rear.

thanks,
Turbo8u
__________________
Cars in the stable right now.
2016 Camaro SS Convertible Nighfall
2013 Dodge Charger SRT8
2002 Chevrolet Quad Cab Duramax
2012 Jeep Wrangler Rubicon BUILT, Supercharged
1969 Camaro FAKE Z28
1968 Ford Bronco Rockcrawler
Turbo8u is offline   Reply With Quote
Old 10-24-2016, 08:50 AM   #11
Perdieu
 
Perdieu's Avatar
 
Drives: 2017 Nightfall Grey Auto 2SS
Join Date: Mar 2012
Location: Blue Springs MO.
Posts: 525
Quote:
Originally Posted by Turbo8u View Post
So do we have to run spacers with the 228's. Mine are ordered and I was planning on running 275/35 front and 305/35 rear.

thanks,
Turbo8u
You'll be fine upfront with the 275/35 combo. its the 275/40 or 285/35 that has issues
Perdieu is offline   Reply With Quote
Old 10-24-2016, 09:43 AM   #12
aka Reckless
 
aka Reckless's Avatar
 
Drives: 2016 2SS Camaro
Join Date: Sep 2016
Location: Cumming, GA
Posts: 541
I have 285/35 on front with no issues
aka Reckless is offline   Reply With Quote
Old 10-24-2016, 10:06 AM   #13
TommyDuncan
 
Drives: 2016 SS2
Join Date: Oct 2016
Location: Las Vegas NV
Posts: 88
Quote:
Originally Posted by Turbo8u View Post
So do we have to run spacers with the 228's. Mine are ordered and I was planning on running 275/35 front and 305/35 rear.

thanks,
Turbo8u
Quote:
Originally Posted by Perdieu View Post
You'll be fine upfront with the 275/35 combo. its the 275/40 or 285/35 that has issues
Quote:
Originally Posted by 2SS_in_GA View Post
I have 285/35 on front with no issues
more than one person runs 285-35-20 with 228s with no issues. I think I am the first to try it with these wheels. I need to pull the front wheel and see if I can use a smaller spacer or do a little clearancing. Kinda doubtful but that was the only size spacer they had.

I don't think it will rub if I lower it. Just a little bit more poke than I like. The back is perfect.
TommyDuncan is offline   Reply With Quote
Old 10-24-2016, 10:13 AM   #14
sub_ETCS_ret

 
sub_ETCS_ret's Avatar
 
Drives: 2019 Dodge Challenger Scat Pack
Join Date: Jun 2016
Location: WA
Posts: 1,390
Quote:
Originally Posted by TommyDuncan View Post
more than one person runs 285-35-20 with 228s with no issues. I think I am the first to try it with these wheels. I need to pull the front wheel and see if I can use a smaller spacer or do a little clearancing. Kinda doubtful but that was the only size spacer they had.

I don't think it will rub if I lower it. Just a little bit more poke than I like. The back is perfect.
Can you take a picture from the back to the front? Interested on seeing how they sit in the fender?
__________________
"Submariners are a bunch of intelligent misfits that somehow seem to get along, understand each other and work well together." - overheard from a surface officer explaining to another sailor about Submariners
sub_ETCS_ret is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:43 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.