Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > CAMARO6.com General Forums > ZL1 Discussions


Phastek Performance


Post Reply
 
Thread Tools
Old 05-04-2022, 07:39 PM   #1
KamZL1
 
KamZL1's Avatar
 
Drives: ZL1
Join Date: Oct 2021
Location: Houston
Posts: 139
How much WHP

so i just watched rpm do headers, intake, exhaust, tune and hit 628/698. baseline at 570 or so. does this seem like reasonable gains or what? what would you see with flex tune added to same mods if so?
KamZL1 is offline   Reply With Quote
Old 05-04-2022, 07:54 PM   #2
JSH


 
JSH's Avatar
 
Drives: '20 ZLE
Join Date: Jun 2020
Location: Mile High
Posts: 3,555
Quote:
Originally Posted by KamZL1 View Post
so i just watched rpm do headers, intake, exhaust, tune and hit 628/698. baseline at 570 or so. does this seem like reasonable gains or what? what would you see with flex tune added to same mods if so?
Yes, those numbers look comparable to those posted by others here previously. Headers and tune will make probably 30-40.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650.
100+ octanes, no eth, no meth, no N2O.
2/23 - 1031/1004 wheel.
4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes).
2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next.
JSH is offline   Reply With Quote
Old 05-04-2022, 08:49 PM   #3
Camaro1973

 
Camaro1973's Avatar
 
Drives: 2019 ZL1
Join Date: Mar 2019
Location: NJ
Posts: 1,534
Quote:
Originally Posted by KamZL1 View Post
so i just watched rpm do headers, intake, exhaust, tune and hit 628/698. baseline at 570 or so. does this seem like reasonable gains or what? what would you see with flex tune added to same mods if so?



They are a little bit higher dyno side because they are in STD. But 650-675 with flex fuel. Basically like Teds package from Jannetty.
__________________
928rwhp - 93 | 1040rwhp/898rwrq - E65 SAE

LME 377 LT4 Short Block | Magnuson 2650 80mm upper w/13% lower (9.06) | DSX Lid & Valve Covers | CSP Custom Cam w/32% fuel lobe | CID Heads | NW 103mm TB | Roto Fab Big Gulp | CSP 2" Headers w/Green GESI Gen 2 Cats | Borla 3" Full Cat Back w/ S-Type| Mighty Mouse Wild Catch Can| Custom Holley Low side Fuel system| TooHigh PSI Port Injection w/Holley Controller | Forced Inductions Interchiller w/2 gallon fender tank | TK Performance built 10L90
Camaro1973 is offline   Reply With Quote
Old 05-04-2022, 10:28 PM   #4
radz28
Petro-sexual
 
radz28's Avatar
 
Drives: Ultra-Grin
Join Date: Oct 2006
Location: Crazy Coast
Posts: 15,186
It seems if you can swing FF, that's the hot ticket. There are many upsides that have been posted all over the place.
__________________

'20 ZL1 Black "Fury"
A10, PDR, Exposed CF Extractor
Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs
radz28 is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:11 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.