![]() |
#1 |
![]() Drives: 2017 1ss 1le Join Date: Sep 2015
Location: new york
Posts: 432
|
Experience with Jtm motorsports?
Anyone on here ever use jtm in deer park for work? I have a set of headers I’d like to have installed and I’d like to get the car tuned for e85 as well. Just wondering if they are trustworthy or if I should try and get the car up to jannetty racing when possible.
|
![]() |
![]() |
![]() |
#2 |
![]() ![]() ![]() ![]() Drives: M6-SS Join Date: Jan 2017
Location: NYC
Posts: 1,332
|
I have not used them but I have heard pros / cons about them.
But again that’s with any shop- Personally I didn’t like jannetty - got pretty rude customer service - wanted me to buy all parts from them at full price when I already had parts- Go with JTM over jannety - |
![]() |
![]() |
![]() |
#3 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Quote:
I don't and can't know what exactly happened there, but disagreements and unwillingness to take full responsibility for a build with unknown customer supplied parts isn't necessarily equal to rudeness...
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
![]() |
![]() |
![]() |
#4 | |
![]() ![]() ![]() ![]() Drives: M6-SS Join Date: Jan 2017
Location: NYC
Posts: 1,332
|
Like I said - every shop has pros and cons -
And it wasn’t “rudeness” just for him telling me he doesn’t want to use my BRAND NEW parts I already purchased to build the car but many other things during my convo with them. I don’t recall who I spoke to- not sure if it was Ted or someone else- Also, 3 of my close friends use Jannetty — 2 of them swear by him and 1 of them switched- so I guess really matter the type of connection or bond you build with them - At end of day both are great shops - I would also look at which shop is closer in terms of routine check ups and stuff or which is more convenient to get to from your locations Quote:
|
|
![]() |
![]() |
![]() |
#5 |
![]() ![]() ![]() Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020
Location: NJ
Posts: 1,065
|
Ok so I totally understand cmeJatt as I used Jannetty for my build and had purchased some parts somewhere else also. Ted wasn't to happy that parts where not purchased from him but I totally understand him as they make money on parts but then again they will charge you more for labor if you don't buy parts from them. All I can say is after the air was cleared between us they are amazing. I will only deal with Jannetty and only issue I had with them.
|
![]() |
![]() |
![]() |
#6 | |
![]() ![]() ![]() ![]() Drives: M6-SS Join Date: Jan 2017
Location: NYC
Posts: 1,332
|
Yeap that was one of my issue with them- I was doing Whipple build but obviously wasn’t ready to spend $$ all at once so I started buying brand new parts 2 years before- after I collected all the parts I hit up jannety but was given run around / extra labor cost / also my build date was being pushed back 9-10 months —
But when my boy asked for similar build (then supplying the parts ) it was 2-3 months — But again nothing against the shop- I understand they want to make money ( I would understand more of people were bringing used parts) but eh— Ultimately choose another shop and 100% satisfied with them. Quote:
|
|
![]() |
![]() |
![]() |
#7 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() |
JTM for the win.
John is one of the best for sure, my guys from upstate NY travel hours to Long Island for his work/ tuning. Great support at any time.
__________________
2017 ZL1 A10: FBO/ W 2650 = 929/955 (9.0 @ 152)
2017 ZL1 A10: Previously FBO 756/761 (9.6 @ 143 1/4) SOLD-2013 ZL1 M6:BTR,LTs,IDs,ATI,RotoFab10.84@129 SOLD-2011 SS M6: Blower, Cam, Alky, LTs. |
![]() |
![]() |
|
|
Post Reply
|
Thread Tools | |
|
|