RoadCourse build.Stock pulley, X ported 1.7 DYNO RESULTS - Page 2

XXX ZL1 · 04-20-2022, 08:22 PM

I wouldn’t focus too much on trying to run full e85 as I’ve had great results with e55-e60. Unless your really chasing the last few hp I would do all the fuel mods and just ease up on the ethanol percentage. On e55-60 700 rwhp should be no issue at all.

CW3SF · 04-20-2022, 08:52 PM

Quote:

Originally Posted by XXX ZL1

I wouldn’t focus too much on trying to run full e85 as I’ve had great results with e55-e60. Unless your really chasing the last few hp I would do all the fuel mods and just ease up on the ethanol percentage. On e55-60 700 rwhp should be no issue at all.

Sounds good. I’ll be very pleased if it breaks 700whp. Also I’ll be happy if it runs e55-e60 too.

CW3SF · 04-22-2022, 06:09 AM

Installing new plugs while I wait for the blower. Stock gap is .040 and I’m thinking I’ll narrow the gap to .036 for the slight increase in boost from the porting. Any other ported guys have an opinion on this?

CW3SF · 05-09-2022, 05:37 PM

Update: The long wait for the porting is almost over. I should have the blower back this Thursday. HPFP and Injector swap will keep me busy tomorrow, and plan to do as much as I can with the Elite CC install. Tuning is scheduled for next Monday.

*radz28* · 05-09-2022, 11:49 PM

SWEET!!! Looking forward to updates.

PICS OR IT DIDN'T HAPPEN

CW3SF · 05-10-2022, 07:51 PM

Quote:

Originally Posted by radz28

SWEET!!! Looking forward to updates.

PICS OR IT DIDN'T HAPPEN

Pics below. I R&R’d the LPE BB HPFP and XDI +30 injectors today. All in all a pretty easy job. Took about 2 hours taking my time. I am amazed how easy these cars are to work on.

Evansa22 · 05-10-2022, 10:47 PM

Looking good, can't wait to see the results!

Chippy · 05-11-2022, 04:17 AM

Huge bump for this member if you need any of his parts they will be sent promptly and packaged very well. Great experience dealing with him.

CW3SF · 05-11-2022, 07:12 AM

Quote:

Originally Posted by Chippy

Huge bump for this member if you need any of his parts they will be sent promptly and packaged very well. Great experience dealing with him.

Thanks for the kind words! I have the Soler TB and controller listed in the member classifieds and about to add Rotofab, injectors and oem HPFP.

Evansa22 · 05-11-2022, 08:22 AM

Quote:

Originally Posted by Chippy

Huge bump for this member if you need any of his parts they will be sent promptly and packaged very well. Great experience dealing with him.

Second this, good guy to deal with. Wouldn't hesitate to jump on anything he's got for sale if you need it.

CW3SF · 05-12-2022, 05:18 PM

Received UPS update today saying that my Supercharger won’t make it here until Saturday (originally said today). In the mean time I have everything done that can be done ahead of time, including running the catch can line under the supercharger. If everything goes ok Saturday night and Sunday I should still be able to get tuned on Monday.

JSH · 05-12-2022, 06:02 PM

Quote:

Originally Posted by CW3SF

Received UPS update today saying that my Supercharger won’t make it here until Saturday (originally said today). In the mean time I have everything done that can be done ahead of time, including running the catch can line under the supercharger. If everything goes ok Saturday night and Sunday I should still be able to get tuned on Monday.

Go, Go, Go!!

CW3SF · 05-12-2022, 08:36 PM

*radz28* · 05-13-2022, 07:43 AM

04-20-2022, 08:22 PM	#15
XXX ZL1 Drives: 2023 ZL1 M6 Join Date: Sep 2018 Location: Pace FL Posts: 416	I wouldn’t focus too much on trying to run full e85 as I’ve had great results with e55-e60. Unless your really chasing the last few hp I would do all the fuel mods and just ease up on the ethanol percentage. On e55-60 700 rwhp should be no issue at all. __________________ 2024 Riverside Blue ZL1 M6 Magnuson 2650R, NW 103, Roto Fab Big Gulp, ARH 2 inch LT's, Stainless Works NPP Signature Forged 20x10.5/20x11.5, BMR springs, BMR Cradle lockout, AAD Billet Control/Trailing arms 2023 Vivid Orange ZL1 M6 - sold 2019 Riverside Blue ZL1 A10 - sold

04-22-2022, 06:09 AM	#17
CW3SF Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019 Location: Sea level Posts: 1,252 View My Garage	Installing new plugs while I wait for the blower. Stock gap is .040 and I’m thinking I’ll narrow the gap to .036 for the slight increase in boost from the porting. Any other ported guys have an opinion on this? __________________ Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50

05-09-2022, 05:37 PM	#18
CW3SF Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019 Location: Sea level Posts: 1,252 View My Garage	Update: The long wait for the porting is almost over. I should have the blower back this Thursday. HPFP and Injector swap will keep me busy tomorrow, and plan to do as much as I can with the Elite CC install. Tuning is scheduled for next Monday. __________________ Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50

05-09-2022, 11:49 PM	#19
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,186 View My Garage	SWEET!!! Looking forward to updates. PICS OR IT DIDN'T HAPPEN __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

05-11-2022, 04:17 AM	#22
Chippy BanHamWatch Drives: 21 ZL1 1LE Join Date: Jan 2021 Location: Calgary, Alberta Posts: 248	Huge bump for this member if you need any of his parts they will be sent promptly and packaged very well. Great experience dealing with him. __________________ 2021 ZL1 1LE Auto

05-10-2022, 10:47 PM	#21
Evansa22 Drives: HBM ZLE Join Date: Aug 2017 Location: In the garage Posts: 801	Looking good, can't wait to see the results!

05-12-2022, 05:18 PM	#25
CW3SF Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019 Location: Sea level Posts: 1,252 View My Garage	Received UPS update today saying that my Supercharger won’t make it here until Saturday (originally said today). In the mean time I have everything done that can be done ahead of time, including running the catch can line under the supercharger. If everything goes ok Saturday night and Sunday I should still be able to get tuned on Monday. __________________ Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50 Last edited by CW3SF; 05-12-2022 at 05:29 PM.

05-12-2022, 08:36 PM	#27
CW3SF Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019 Location: Sea level Posts: 1,252 View My Garage	__________________ Kong Stage X Port, NW103, LPE HPFP, XDI +30 Injectors, ARH Headers, Flex Fuel, JMS Booster, AWE Touring, Elite E2-X CC. Stock heads, stock cam, stock pulleys: Tuned by KingLT1. 740whp Uncorrected on e50

05-13-2022, 07:43 AM	#28
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,186 View My Garage	__________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

User Name		Remember Me?
Password