08-19-2019, 10:40 PM | #1 |
Drives: 2020 Satin Steel 2SS Coupe Join Date: Jan 2011
Location: Springfield, Missouri
Posts: 640
|
2019-20 front SS badge removal
Has anyone taken this off without removing the front bumper? I really don't want to deal with that.
__________________
2020 Satin Steel 2SS Coupe
|
08-19-2019, 10:53 PM | #2 |
Account Suspended
Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017
Location: California
Posts: 1,694
|
It just clips on ..but honestly it's not hard to take the front bumper off ..I just had mine off tonight and back on .let me know if you need any help bro
|
08-19-2019, 11:47 PM | #3 |
Drives: 2019 Camaro 2SS A10 Join Date: Feb 2019
Location: San Diego
Posts: 207
|
Heat it up with a heat gun / hair dryer and gently lift. It comes right off, just two sided tape. There's two alignment pins, but no nuts or anything.
Just a heads up, if you're doing it to de-badge, there'll be a small flat area that will be visible. Most people wouldn't notice, but there is one.
__________________
2019 2SS: A10, Satin Steel Gray Metallic, MRC, Nav.
Last edited by RLem619; 08-19-2019 at 11:57 PM. |
08-20-2019, 12:32 AM | #4 | |
Account Suspended
Drives: 2019 SS 2019 mustang GT Join Date: Apr 2017
Location: California
Posts: 1,694
|
Quote:
|
|
08-20-2019, 12:50 AM | #5 |
Drives: 2020 Satin Steel 2SS Coupe Join Date: Jan 2011
Location: Springfield, Missouri
Posts: 640
|
I managed to get the bottom clip off, but can't even see the top one. I'll just take the bumper off tomorrow. Not a huge job, I was just being lazy.
__________________
2020 Satin Steel 2SS Coupe
|
08-20-2019, 12:56 PM | #6 |
Drives: 2018 Camaro SS 1LE Join Date: Aug 2018
Location: Tampa Florida
Posts: 1,980
|
16-18 are a pain imo, those snap pins are hard through the hood latch hole but doable, and if you debadge it leaves a big empty spot where the badge was. 2020s are easier as it just clips on to the upper grill and it is more easily removed by just unscrewing it and it looks clean after debadging.
__________________
2000 Miata - aventi storm wheels, roll bar.
2019 Mustang GT pp1 - svt pp2 wheels, mbrp cat back, sync 3 upgrade, p1x procharger + stg2 intercooler. 2018 Colorado zr2 - zr2 sport bar, showcase spare tire. 2018 Camaro SS 1LE - GM cai, black bowties, suede knee bolsters, 1le plate frame, black fuel door, dark tails + 3rd brake light, euro side markers + led's, GM all weather floor mats, velossatech big mouth, GM strut brace. 2017 Corvette Grandsport (sold) - untouched. 2006 GTO (sold) - iat relocation, air box mod, monero side marker lights. |
08-20-2019, 04:50 PM | #7 |
Drives: 2013 Camaro ZL1 convertible IOM Join Date: Feb 2008
Location: Lewisville, TX
Posts: 270
|
Why not just buy a V6 if you want everyone to think you have one?
|
08-20-2019, 07:48 PM | #8 |
Drives: 2020 Satin Steel 2SS Coupe Join Date: Jan 2011
Location: Springfield, Missouri
Posts: 640
|
First, I don't care what anyone thinks I have. I'm driving it, and I'm the one looking back at it every time I get out. Second, if they can't tell by the heat extractor, spoiler, bumper, grille, exhaust note, quad exhaust tips, or staggered tires, they wouldn't be my target audience anyways.
__________________
2020 Satin Steel 2SS Coupe
|
08-20-2019, 11:06 PM | #9 |
Drives: 2020 Satin Steel 2SS Coupe Join Date: Jan 2011
Location: Springfield, Missouri
Posts: 640
|
UPDATE: After I took the bumper off, it became obvious that the metal clip I had already removed was the only thing holding it in. It's just wedged in at the top and requires firm pressure to push backwards. I tried pushing before, but I was just being a bitch about it... It probably would have dropped behind the grille though, so I'd have had to take the bumper off anyway (or that's what I'm telling myself).
__________________
2020 Satin Steel 2SS Coupe
|
05-11-2020, 01:13 PM | #10 | |
Drives: 2020 2ss 1le Satin Steel Join Date: Nov 2018
Location: Austin,TX
Posts: 16
|
Quote:
|
|
|
|
Post Reply
|
|
|