09-16-2020, 11:19 AM | #15 |
Drives: 2019 Camaro SS Join Date: Jun 2019
Location: Merigold,MS
Posts: 30
|
Set the the volumes to 0.
__________________
2019 Camaro 1SS A10 River Side Blue
Max effort tuning llc Rotofab dry, ported msd, nw 103mm Tb , speed engineering 2” headers, velossa tech,ati ud, aerospace front brakes, and flex fuel |
09-16-2020, 11:48 AM | #16 |
Drives: 2007.5 Duramax Join Date: Nov 2016
Location: Houston
Posts: 101
|
Is this what folks do normally or just for my case?
__________________
Built C6Z 600whp NA - SOLD
Built LSX 96SS - SOLD 68 Camaro - 6.2/10l80, self built and tuned. |
09-16-2020, 11:55 AM | #17 |
Drives: 2019 Camaro SS Join Date: Jun 2019
Location: Merigold,MS
Posts: 30
|
It’s the normal way to do it. Your sensor is right at the motor so as soon as it sees alcohol it needs to start changing the percentage and stoich.Where as with the stock settings it may start seeing the alcohol but, it won’t change the percentage until after you have consumed the volume of fuel in the first box and then it won’t change the stoich until it uses the amount of volume in the second box.
When you set them to zero it changes the percentage and stoich as soon as it sees a change in alcohol.
__________________
2019 Camaro 1SS A10 River Side Blue
Max effort tuning llc Rotofab dry, ported msd, nw 103mm Tb , speed engineering 2” headers, velossa tech,ati ud, aerospace front brakes, and flex fuel |
09-16-2020, 12:42 PM | #18 |
Drives: 2007.5 Duramax Join Date: Nov 2016
Location: Houston
Posts: 101
|
Perfect. Let me try this. Thanks everyone
__________________
Built C6Z 600whp NA - SOLD
Built LSX 96SS - SOLD 68 Camaro - 6.2/10l80, self built and tuned. |
09-16-2020, 01:40 PM | #19 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,800
|
I agree with Toxic. Good catch!
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
10-08-2020, 10:07 AM | #20 |
Drives: 2007.5 Duramax Join Date: Nov 2016
Location: Houston
Posts: 101
|
I'm going to bring this one back up. Everything seemed to work fine up until I let the car sit for a couple weeks. When I started the car it did not start up as aggressively as it normally does then died within seconds. I pulled out the scanner and found the car to be reading 40% alcohol and I think 100% on the ethanol side when I should be around 80% on both. The transition and blend volumes were change to zero for immediate results as mentioned above.
I tired a few little things like unplugging the sensor and no change. I then reflashed the tune and everything worked as it should. Is there something needed in my tune or a trick to this not happening when I'm out and about without my laptop? See attached tune.
__________________
Built C6Z 600whp NA - SOLD
Built LSX 96SS - SOLD 68 Camaro - 6.2/10l80, self built and tuned. Last edited by jasonz28camaro; 10-08-2020 at 10:42 AM. |
|
|
Post Reply
|
|
|