04-11-2020, 03:32 PM | #1 |
Red Hot SS
Drives: 2017 Camaro 2SS Join Date: Nov 2013
Location: Winnipeg, Manitoba, Canada
Posts: 150
|
will they fit
Looking at the ZL1 replica wheels for my 2017 Camaro ss. The fronts are 20x10" 40 mm offset. The rears are 20x11" 43 mm offset. Now the rears should be fine except the harness on drivers side. The fronts is where i need some advice. If i add a 10mm spacer or maybe a 15mm adapter would those wheels fit by the front strut and would they poke past the fender well? Pictures if you have any of this setup. Tires i would like to use would be 275/35/20 up front and 315/30/20 in the rear.
|
04-11-2020, 10:57 PM | #2 |
Drives: 2019 2SS Camaro Join Date: Apr 2012
Location: Al
Posts: 828
|
you will need a 15 to 20 mil spacer I would go 20. 10 is no good as studs are not long enough for me. 15 for no poke.
|
|
|
Post Reply
|
|
|