04-09-2021, 05:53 PM | #1 |
Car not starting saying push brake pedal
Car will start with key fob but won't turn on when I push button. Saying push brake. Changed brake light switch still not turning on. Any help would be appreciated.
|
|
04-09-2021, 06:21 PM | #2 |
|
Disconnect the negative battery cable wait a few minutes and then reconnect to force a re-boot. A lot of weird problems with these cars get fixed that way.
Good luck and keep us posted.
__________________
2016 Camaro 1SS Hyper Blue 6MT NPP
2010 Camaro 2SS Cam/Headers/CAI/3.91 gears 476 rwhp/440 rwtq (sold) |
04-09-2021, 08:16 PM | #3 |
Tried that. No change
|
|
04-10-2021, 02:10 PM | #4 |
Drives: 2017 Camaro 2SS Join Date: Mar 2019
Location: Lakeland, Florida
Posts: 416
|
It might work if you do a full power down. Disconnect the battery for eight to ten hours, that should drain all the capacitors and you get a full reboot. If it doesn't work, at least it didn't cost anything but I did that for a couple of gremlins and they disappeared...
__________________
Gary
2017 2SS A8 White, Bolt-Ons, Prayed Upon |
04-10-2021, 08:59 PM | #5 |
Drives: 2023 CT5 Blackwing Join Date: Sep 2016
Location: Orlando
Posts: 1,614
|
What's your battery voltage? The 6th Gens act weird when the batteries get weak.
__________________
2017 HBM SS 1LE
Sold 2023 Wave Metallic CT5-V Blackwing M6 |
07-11-2021, 02:47 PM | #6 |
Ending up being brakelight switch and connector. tried changing switch myself with and AC Delco part but that didn't work took to the dealer.and they fixed it.my have been just the connector.
|
|
07-11-2021, 08:31 PM | #7 |
Drives: women crazy Join Date: Aug 2020
Location: CA
Posts: 698
|
How did you get your car to the dealer?
__________________
‘19 1SS A10, Borla S-type Non-NPP-SOLD
|
|
|
Post Reply
|
Thread Tools | |
|
|