Homepage Garage Wiki Register Community Calendar Today's Posts Search
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Tuning / Diagnostics


Bigwormgraphix


Post Reply
 
Thread Tools
Old 05-23-2022, 07:03 PM   #29
Joshinator99


 
Joshinator99's Avatar
 
Drives: 2017 Camaro 2SS A8
Join Date: Aug 2018
Location: Petersham MA
Posts: 4,741
Quote:
Originally Posted by JANNETTYRACING View Post
It should not change if calibrated properly.

Ted.
Quote:
Originally Posted by JSH View Post
We disagree on this point.
Feel like the car would pick up the difference in barometric pressure and alter the tune accordingly...? Might take a few cracks to get that dialed in, but shouldn't be much different than tuning in flex fuel. Once you get it right, the car will adjust to the changes on the fly.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
Joshinator99 is offline   Reply With Quote
Old 05-23-2022, 08:24 PM   #30
6spdhyperblue


 
Drives: 6th gen
Join Date: Aug 2013
Location: US
Posts: 3,670
Doesn’t the y axis on the enrichment tables have baro
__________________
‘22 2SS 1LE M6 Summit White - RF, Flexfuel, LT2 intake, 95mm tb, ATI udp, VT ramair, full 28” dragpack - 11.68@122
‘16 1SS M6 LT2 intake + boltons on DR 11.0@126+ (Sold)
6spdhyperblue is offline   Reply With Quote
Old 05-24-2022, 07:25 AM   #31
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: BLUE CAMARO ZL1 1LE M6
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,223
Quote:
Originally Posted by Joshinator99 View Post
Feel like the car would pick up the difference in barometric pressure and alter the tune accordingly...? Might take a few cracks to get that dialed in, but shouldn't be much different than tuning in flex fuel. Once you get it right, the car will adjust to the changes on the fly.
Quote:
Originally Posted by 6spdhyperblue View Post
Doesn’t the y axis on the enrichment tables have baro
Correct all tables reference Baro/MAP to come up with Pressure ratio.

If the calibration is right Air density is accounted for in all conditions.

Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 05-24-2022, 11:47 AM   #32
R8der11
 
Drives: 2021 ZL1 1LE
Join Date: Jul 2021
Location: CA
Posts: 12
Quote:
Originally Posted by JANNETTYRACING View Post
Proper tuning is done from Idle up, Not Full throttle down.

Ted.
Would a voltage booster help with these codes?
129D and 12a6

did a search and it resulted in this - The Diagnostic Trouble Code (DTC) will be set when the Fuel Pump Power Control Module ignition switch circuit voltage is less than a calibrated value for 1 s.
R8der11 is offline   Reply With Quote
Old 05-24-2022, 12:00 PM   #33
JANNETTYRACING

 
JANNETTYRACING's Avatar
 
Drives: BLUE CAMARO ZL1 1LE M6
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,223
Quote:
Originally Posted by R8der11 View Post
Would a voltage booster help with these codes?
129D and 12a6

did a search and it resulted in this - The Diagnostic Trouble Code (DTC) will be set when the Fuel Pump Power Control Module ignition switch circuit voltage is less than a calibrated value for 1 s.
Although a JMS fuel system voltage booster is strongly recommended for any supercharger application it will have no effect on your codes.

Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705
email tedj@jannettyracing.com
JANNETTYRACING is offline   Reply With Quote
Old 05-24-2022, 12:15 PM   #34
R8der11
 
Drives: 2021 ZL1 1LE
Join Date: Jul 2021
Location: CA
Posts: 12
Quote:
Originally Posted by JANNETTYRACING View Post
Although a JMS fuel system voltage booster is strongly recommended for any supercharger application it will have no effect on your codes.

Ted.
Thanks for the feedback, Ted. They popped up about three weeks after the car was tuned
R8der11 is offline   Reply With Quote
 
Post Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:16 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.